falconut
New member
When I test my PO4 and NO3 they both read 0. NO3 tested using Salifert kit and PO4 using Hanner PO4 Checker. My skimmer (ASM-G2) hasn't been pulling any thick dark sludge for years, just a greenish lighter colored stinky liquid. If I try to dry skim, I get almost nothing, but wet skimming does get as described. I've been running WM EcoBAK pellets and GFO, both in reactors. Plus I have Chaeto and Mangroves in my refuge.
Now, I usually take a water sample from the top few inches of the DT. As above, they both read 0. My Chaeto doesn't seam to be growing anymore. But I do have some minor algae on some of the rocks. So, there must be something in the tank.
I decided to reach down and take a sample right next to the rock in the lower area. I tested it for PO4 and it tested at 0.08, so there is definitely some present.
Based on this, it appears that maybe I'm just flowing the clean tank water through the sump and refuge, where my skimmer, GFO, pellets and chaeto are. I will occationally blow off the rocks and stir up the crud with a turkey baster. But this hasn't seem to help.
I recently added a Koralia Nano 425 to stir a small dead corner and I've got a Mag-Drive 18 as a closed loop. When I stir the debris, the flow clearly goes around the tank and appears to flow through every area and then goes into the overflow box.
Is it possible that my skimmer just isn't working good anymore and the organic waste is just building? I'm not sure if this is the case, I got a new pump 1 year ago and it's still producing a thick foam, it's just pretty much a white foam. So, it certainly seams that the water is clean. I even added a 100 micron filter sock, which I change weekly.
Any ideas on what else to try?
Now, I usually take a water sample from the top few inches of the DT. As above, they both read 0. My Chaeto doesn't seam to be growing anymore. But I do have some minor algae on some of the rocks. So, there must be something in the tank.
I decided to reach down and take a sample right next to the rock in the lower area. I tested it for PO4 and it tested at 0.08, so there is definitely some present.
Based on this, it appears that maybe I'm just flowing the clean tank water through the sump and refuge, where my skimmer, GFO, pellets and chaeto are. I will occationally blow off the rocks and stir up the crud with a turkey baster. But this hasn't seem to help.
I recently added a Koralia Nano 425 to stir a small dead corner and I've got a Mag-Drive 18 as a closed loop. When I stir the debris, the flow clearly goes around the tank and appears to flow through every area and then goes into the overflow box.
Is it possible that my skimmer just isn't working good anymore and the organic waste is just building? I'm not sure if this is the case, I got a new pump 1 year ago and it's still producing a thick foam, it's just pretty much a white foam. So, it certainly seams that the water is clean. I even added a 100 micron filter sock, which I change weekly.
Any ideas on what else to try?