Need input on the Wavysea

[pookstreet]

Anyone use this in their tank? How do you like it? Do you feed it with an external pump or attach a powerhead to it? How would it attach to a tank with eurobracing? Some pix would be much appreciated.

 

[Bebo77]

i have 2 of them and i love them.. i only wish there was a "feed" button. they are attached to Pan world pumps( soon to be 1 Red Dragon"

the wavy seas come with adaptors it will fit on/ up to 3/4" acrylic

 

[pookstreet]

Got any pix Gabe? I want to put one of these on my tank to mix up the flow. Right now I have too many dead spots and have some STN issues. I have a closed loop drain that's not being used and I was thinking of using an Eheim 1262 to feed the Wavysea. Or attach one of the new Tunze Nano Streams, although that may look a bit bulky swing around in my 30 :lol:

 

[Frankysreef]

I just built a semi closed loop system for the same problems, I used 10 bucks worth of PVC, 6 t's 6 90's and 2 45's.. It runs along the back of the tank, raises the water level 3 inches, and puts out about 400 gph at each outlet.. I also reduced the 3.4 to 1.2 to increase flow... So far the results have been good... I have had some browning cause I changed something...But the flow patterns look good.

 

[fatty23]

hey kenny
i have a black wavy sea im not useing can give you a good deal on used for a couple months on a holding tank
thanks
john
ps it the reg not the plus

 

[pookstreet]

<a href=showthread.php?s=&postid=8445369#post8445369 target=_blank>Originally posted</a> by fatty23
hey kenny
i have a black wavy sea im not useing can give you a good deal on used for a couple months on a holding tank
thanks
john
ps it the reg not the plus

John, YGPM. Thanks.

 

[Mchava]

Hey Kenny if your stopping by on Wed. I have one on my tank. I love mine. I was able to stick a tunze 6080 on it and did well. But I ended up just using it for my returns instead works great.

 

[pookstreet]

<a href=showthread.php?s=&postid=8445955#post8445955 target=_blank>Originally posted</a> by Mchava
Hey Kenny if your stopping by on Wed. I have one on my tank. I love mine. I was able to stick a tunze 6080 on it and did well. But I ended up just using it for my returns instead works great.

Sounds good Mario. I would love to see one in action. When I have confirmation for my job down that way, I'll call you and confirm the date and time. Thanks.