Poppy828
Active member
Due to personal reasons that I do not want to divulge at this time, my wife and I have decided to step away from this rewarding hobby for a bit with great reluctance. However, this is something that must be done at this time.
Up for sale is as follows:
120g AGA RR tank. Bought and put in use Feb. 06ââ"šÂ¬Ã¢"žÂ¢. The tank has been drilled in the back for an oceans motions 4 way with 2 extra drums running on a Reeflo dart pump. (6) 1ââ"šÂ¬Ã‚ output holes and (1) 2ââ"šÂ¬Ã‚ intake. All the plumbing was done with true union ball valves for easy removal. The tank has been going since Feb. 06. It sits on a custom stand made out of 2x4ââ"šÂ¬Ã¢"žÂ¢s with a plywood base on the bottom and a plywood top where the tank would sit. Stand has been painted white with a latex paint. 2 coats. No center brace was installed for easy access under the stand. A custom made Oak shell slips on and off the front of the stand with 2 doors. There is a matching canopy as well. Canopy opens from the top or with the 2 doors on the front. These items were built for a 75g I had prior to the 120. I have the Oak to extend these pieces the 6ââ"šÂ¬Ã‚ needed to make the difference up between the 75 and 120g so you do not see the tank/2x4 framing. I used black pond foam on the back glass that is starting to become encrusted in coralline algae. Looks nice. Along with that is a 40g AGA sump. It is wide open with no baffles. In the sump is an ASM G3. I have the Sedra 5000 and a Sedra 9000 pump for the skimmer. I currently use the 9000 and it seems to do a better job than the 5000. I have a mag 9.5 for a return. Brand new 3 weeks of use on it. Most of the flow comes from the Oceans motions/Dart setup. The dart is rated at 3600gph. An EBO Jager 250w heater is also in the sump and maintains the temperature with no problems. All items listed above are brand new as of Feb. 06ââ"šÂ¬Ã¢"žÂ¢ unless noted otherwise.
I have just purchased a Digital Aquatics Reef Keeper II controller. Works great and no issues. Was bought 3 weeks ago. I am running the newer style coralvue ballasts (6 months old) (250w) I have (2) 250w mogul 10k Reeflux bulbs. 4 months old and (2) Reef optix 3 pendants with Phoenix 14k 250w DE bulbs 1 month old. All cords have quick connect plugs for easy removal.
I also have a 65g Poly tank that is used for make up water. It is plumbed with a 6 month old mag 9.5 with a union for easy removal. This is plumbed to the tank to mix the water/salt and also go to the sump with a ball valve for water changes. Works nicely for water changes. No buckets or containers to lug around. I have a reef-filler tied into a 35g leg tank for my evaporation. The reef filler is good up to 7g a day. That is less than a year old. The leg tank is plumbed with a float valve and the RO/DI plumbed to that. This is fed to my sump. On the leg tank, I plumbed a Mag3 pump to circulate the water every day for 20 minutes. I use kalk in this container with no issues. I also have (1) 60g stock tank and (1) 50g stock tank and several Rubbermaid containers. I have 2 brand new Ebo Jager 250w heaters. Used 1 time to do the swap from the 75g to the 120g. I have (1) used but good condition seio 820 and 1100. I have brand new Salifert test kits used twice. My RO/DI unit is an Airwaterice unit. The typhoon 5 stage. I have had it for a year with no problems. I have 2 extra 75g membranes and several Misc filters including DI. All brand new of course. I have an inline TDS meter on this unit. Used for 6 months or so. I also use a handheld TDS to just keep things in check.
Livestock:
100+ lbs of figi and other types of live rock. 1 piece which is my center piece has a natural cave in it and is about 20lbs by itself. All rock is covered in coralline with nice dark and light purples and other colors. I will need to get a list together of all the corals, but will give a general idea here. SPS, LPS and soft corals. Zoanthids, leather, acros, milles, torch coral, rose anemone, frogspawn. May be others I missed, but will get a complete list later. The fish include, a Hippo tang, sailfin tang, both small to medium size, yellow face pygmy angel, pink spotted shrimp goby, mandarin dragonet, yellow head jawfish, six line wrasse and (2) Onyx Clowns that have paired up. Momma has laid eggs once that I have seen, but Papa is still too young to do anything with them. All fish are healthy and eat well. I feed Rodââ"šÂ¬Ã¢"žÂ¢s food only and they each eat it.
I had an issue with the acro eating flatworms on a few pieces of acro, Those pieces were removed from the tank and a treatment done. Worms gone. All other SPS were inspected and have no signs of them and never did. The pieces that had them came from a neglected tank that I was doing a favor for my old man. I am very anal with my tank and do everything possible to keep my livestock happy and healthy. Anyone that has seen it can attest. No expense was spared when it came to livestock or parts needed to keep the tank going 100%
I would like to sell as a whole to avoid issues of regret and my livestock suffering from partial teardowns of equipment. I have over 3K invested in this without the livestock. Will do a package deal for everything including livestock for $2,500. Will help deliver within reason if needed. Everything is pretty much plug and play for you to setup. I will include any Misc parts I have laying around also. Plumbing, bulk heads, other tanks etc.
Feel free to email or call me to come by and take a look.
Thank you for your interest.
Todd
Toddattoddhornsbydotcom
Sixthreezero-sixsixnine-zerosixninetwo
Up for sale is as follows:
120g AGA RR tank. Bought and put in use Feb. 06ââ"šÂ¬Ã¢"žÂ¢. The tank has been drilled in the back for an oceans motions 4 way with 2 extra drums running on a Reeflo dart pump. (6) 1ââ"šÂ¬Ã‚ output holes and (1) 2ââ"šÂ¬Ã‚ intake. All the plumbing was done with true union ball valves for easy removal. The tank has been going since Feb. 06. It sits on a custom stand made out of 2x4ââ"šÂ¬Ã¢"žÂ¢s with a plywood base on the bottom and a plywood top where the tank would sit. Stand has been painted white with a latex paint. 2 coats. No center brace was installed for easy access under the stand. A custom made Oak shell slips on and off the front of the stand with 2 doors. There is a matching canopy as well. Canopy opens from the top or with the 2 doors on the front. These items were built for a 75g I had prior to the 120. I have the Oak to extend these pieces the 6ââ"šÂ¬Ã‚ needed to make the difference up between the 75 and 120g so you do not see the tank/2x4 framing. I used black pond foam on the back glass that is starting to become encrusted in coralline algae. Looks nice. Along with that is a 40g AGA sump. It is wide open with no baffles. In the sump is an ASM G3. I have the Sedra 5000 and a Sedra 9000 pump for the skimmer. I currently use the 9000 and it seems to do a better job than the 5000. I have a mag 9.5 for a return. Brand new 3 weeks of use on it. Most of the flow comes from the Oceans motions/Dart setup. The dart is rated at 3600gph. An EBO Jager 250w heater is also in the sump and maintains the temperature with no problems. All items listed above are brand new as of Feb. 06ââ"šÂ¬Ã¢"žÂ¢ unless noted otherwise.
I have just purchased a Digital Aquatics Reef Keeper II controller. Works great and no issues. Was bought 3 weeks ago. I am running the newer style coralvue ballasts (6 months old) (250w) I have (2) 250w mogul 10k Reeflux bulbs. 4 months old and (2) Reef optix 3 pendants with Phoenix 14k 250w DE bulbs 1 month old. All cords have quick connect plugs for easy removal.
I also have a 65g Poly tank that is used for make up water. It is plumbed with a 6 month old mag 9.5 with a union for easy removal. This is plumbed to the tank to mix the water/salt and also go to the sump with a ball valve for water changes. Works nicely for water changes. No buckets or containers to lug around. I have a reef-filler tied into a 35g leg tank for my evaporation. The reef filler is good up to 7g a day. That is less than a year old. The leg tank is plumbed with a float valve and the RO/DI plumbed to that. This is fed to my sump. On the leg tank, I plumbed a Mag3 pump to circulate the water every day for 20 minutes. I use kalk in this container with no issues. I also have (1) 60g stock tank and (1) 50g stock tank and several Rubbermaid containers. I have 2 brand new Ebo Jager 250w heaters. Used 1 time to do the swap from the 75g to the 120g. I have (1) used but good condition seio 820 and 1100. I have brand new Salifert test kits used twice. My RO/DI unit is an Airwaterice unit. The typhoon 5 stage. I have had it for a year with no problems. I have 2 extra 75g membranes and several Misc filters including DI. All brand new of course. I have an inline TDS meter on this unit. Used for 6 months or so. I also use a handheld TDS to just keep things in check.
Livestock:
100+ lbs of figi and other types of live rock. 1 piece which is my center piece has a natural cave in it and is about 20lbs by itself. All rock is covered in coralline with nice dark and light purples and other colors. I will need to get a list together of all the corals, but will give a general idea here. SPS, LPS and soft corals. Zoanthids, leather, acros, milles, torch coral, rose anemone, frogspawn. May be others I missed, but will get a complete list later. The fish include, a Hippo tang, sailfin tang, both small to medium size, yellow face pygmy angel, pink spotted shrimp goby, mandarin dragonet, yellow head jawfish, six line wrasse and (2) Onyx Clowns that have paired up. Momma has laid eggs once that I have seen, but Papa is still too young to do anything with them. All fish are healthy and eat well. I feed Rodââ"šÂ¬Ã¢"žÂ¢s food only and they each eat it.
I had an issue with the acro eating flatworms on a few pieces of acro, Those pieces were removed from the tank and a treatment done. Worms gone. All other SPS were inspected and have no signs of them and never did. The pieces that had them came from a neglected tank that I was doing a favor for my old man. I am very anal with my tank and do everything possible to keep my livestock happy and healthy. Anyone that has seen it can attest. No expense was spared when it came to livestock or parts needed to keep the tank going 100%
I would like to sell as a whole to avoid issues of regret and my livestock suffering from partial teardowns of equipment. I have over 3K invested in this without the livestock. Will do a package deal for everything including livestock for $2,500. Will help deliver within reason if needed. Everything is pretty much plug and play for you to setup. I will include any Misc parts I have laying around also. Plumbing, bulk heads, other tanks etc.
Feel free to email or call me to come by and take a look.
Thank you for your interest.
Todd
Toddattoddhornsbydotcom
Sixthreezero-sixsixnine-zerosixninetwo
as well as the clowns. Let me know.
