OT-Anyone have a Yamaha YSR50?

[Bamm Bamm]

I just picked up a 1988 Yamaha YSR50 today minus the motor and fairings, came with two sets of new tires and aftermarket triple clamp and front forks setup for a 200lb rider which I am=)..

Im planning on putting my 1991 yamaha Water cooled YZ250motor in it=) Should be a bunch of fun!!

Anyone else have one or know of any good place to buy parts?
Looking for a sprocket that will fit a 520 chain. rear disc brake conversion kit, extended swingarm(I might just extend mine myself=)... etc...


if your not familiar with the bikes there street legal 50cc streetbikes that are about half the size of a fullsize streetbike=)

 

[Bamm Bamm]

it's a bit rough but will look good after I custom paint it(more than likely myself)

 

[yamaha racer]

There is a place in Santa Cruz, it's pretty far but they have alot and can get anything.
It's called we all ride

 

[Bamm Bamm]

thanks for the info i'll check em out...

 

[dieselab]

I got 3. Plenty of parts available. Place you are looking for is Team Calamari in Monterey County.

 

[Bamm Bamm]

Right on man.. Hey can they make me a rear sprocket for the larger chain? What do you have done to your? I want to get a few more after I finish this one..
a stock one and I want to put a 450motor in one also..

 

[dieselab]

main thing you want to look for is a new rear shock since the stock ones aren't any good. best out there, but out of production is made by Fox. I use to take it to sacramento back in the days for racing, but they close the track down. PM me if you need parts.

 

[Bamm Bamm]

I've heard about people using R6 rear shocks on them? heard of that.. Those FOX and Ohlins ones are expensive like $500 on eBay..

Mostly Im looking for bosy panels right now.. I don't have any besides half of the tail section... Are yours all street legal?Im trying to figure out how to wire everything up when I put the YZ250 motor in it.. Probably convert it to 12volt doesn't seem too hard to do about $20 in parts from what I read on www.ysr50.com