PH is low?

Test with you other test kit, disregard apex, probe is not reading correctly, did you try the other port? Or pm2, that port on apex is most likely compromise, starting a ticket with Neptune is your best chance to figuring it out, had very similar problems in the past, that jerky graph shows like a bad sensor...


Sent from my SM-G892A using Tapatalk
 
But did you see the pic of where my ph went down to 7.77 ? I have plenty of flow my air intake from skimmer is coming in from the outside . Windows open


Sent from my iPhone using Tapatalk
 
Don't mater it went to 7, seen them only have a narrow window, and still look like it's working but it's not, it's having hard time stabilizing and reading higher numbers, it's real jerky, the weird stuff on top of graph, and all the jerky readings, if you watch the sensor in real time in the classic dash you will see it wandering around. I can see it in your graph w my eyes..its probly been that way from day one and you wouldn't know, because it's always been funky, mine had a bad probe and it would not climb I bought a new probe and it still was funky , made a ticket with Neptune , technician was a badass with the computer , he did most of the work , my port needed refreshed and a new probe, you can do all your self if you like, after I watched what he did it's lot all that difficult.

Sent from my SM-G892A using Tapatalk
 
E-mail works great too, they will call , they called me at 8:00 one night, the technician I was using worked from home, do you have a New probe handy?

Sent from my SM-G892A using Tapatalk
 
Pull that one and clean it and prepare for them, have all your calibration solutions ready, I calibrate my buy clipping the bag in sump so it's the same temp as tank water.

Sent from my SM-G892A using Tapatalk
 
CO2 Scrubber and maybe if you can open a window from time to time, also if you don't have one run a refugium or an algae scrubber on reverse light schedule
 
Back
Top