Placement and control questions

[Charlie's Angel]

I have been playing with my pumps to get them where they are best and am stuck. Tank is 96x30x30 and is a mixed reef. Have been slowly adding more SPS. Had two 6100's and was running an interval 1 program with them in the corners and pointed diagonal at the front glass. Just added a 6201 Friday. Had it in the middle of one side and was running it straight across the tank. It was on the interval program and was running at the same time as the 6100 on the opposite corner. I am looking for advice on where to locate these and what program to run. I can only attach one Tunze to one side because it is against a wall.

Thanks

 

[rvitko]

I would suggest placing the 2 6100's aimed straight across on the same side and a 6201 in the opposite back corner aimed across the diagonal. You could use Int 1 or 2.

 

[Charlie's Angel]

Will try that tonight. I am close to that with one 6100 and the 6201 on the same side pointing across with the other 6100 pointed diagonal at opposite back corner and am running them on pulse. Thanks Roger