Please help with lighting

[gypsyboyz]

Hello so here's the deal I have a older 14 gallon biocube that I setup last week and what I have done is taken out the actinic light and replaced it with a panorama pro module in its place. So first question is was that ok to do. Next question should I run the daytime lights with the panorama and how long should I leave the lights on.I do have a timer. Also and I'm sorry if these are stupid questions I'm new to this but how high should I keep the panorama dimmer I was told about 50%.
Panorama pro module 24v
16watt 12k white/445nm blue
Whatever that means lol
And just let me know if it would've been better to swap the daytime instead. Thanks in advance for all the help.

 

[gypsyboyz]

Bump please help

 

[Pife]

I don't know what a panorama is. Hopefully someone else on here will.

 

[gypsyboyz]

Bump again lol

 

[Benar]

You can run the day lights (12k white leds) but it may appear very white as there's 8 whites to 4 royal blues.
You can run 3 modules off that one 60w transformer, if that's what you have?
16w isn't a lot of light depending on what you plan on keeping. Here's what I'd do, if you can afford another 2 modules, they're only $40-50 right?
Option A) buy another 12k/445nm AND a 12x 445nm running the blue in the middle and the 12k/blue either side.
Option B) put your current 12k/445nm in the middle, AND buy another 2 modules eg: 2x blue modules?.. Or 1 blue and 1 blue/magenta?

 

[syngraves]

there are some drop in LED kits made specifically for the 14g biocude. i think rapidLED has a kit. a quick google search will yield plenty of lighting options since the factory lighting on those is lacking for most types of corals and nems.

 

[gypsyboyz]

Thanx for the help I will look into option b sounds like it would look the best