Please help with Maintenance Modes

[shaggss]

Hi All

I need some help please! I have P3 with latest FW and GCC.

I am using optical sensor for ATO.

Here is what I would like to do:

Maintenance 1 (Water Change)

1. Return Pump Off for 20mins
2. Skimmer off for 30mins
3. Disable ATO for 45mins

Maintenance 2 (Fish Acclimatisation)

1. Metal Halide off for 10 hours
2. T5s off for 10 hours

Also I have set my Feed Pause up like this:

In Programing logic in G1:
Input = filter
Time = 600 sec.
function = delay On

set the skimer socket to: Programable Logic 1 (G1)

How do I also disable the optical sensor for ATO for 600sec as well?

 

[Antipodes]

I have tried to help others with the logic like this, but I find that I really need every setting on the profilux or it is too difficult as you don't know what something is connected to, how they use other programable logic which could interfere etc.
For this sort of stuff we really something like Neptune is got, which is a dummy program you can run the your settings into see if they work(At least they used to, not sure for the apex). Then you just can just send a complete settings file and I can replicate and change to make it work.
If I had a spare profilux I could do this also, but I don't!

In short it can be done, but need every parameter of your setup to replicate/change.

 

[shaggss]

I have tried to help others with the logic like this, but I find that I really need every setting on the profilux or it is too difficult as you don't know what something is connected to, how they use other programable logic which could interfere etc.
For this sort of stuff we really something like Neptune is got, which is a dummy program you can run the your settings into see if they work(At least they used to, not sure for the apex). Then you just can just send a complete settings file and I can replicate and change to make it work.
If I had a spare profilux I could do this also, but I don't!

In short it can be done, but need every parameter of your setup to replicate/change.

Hi Antipodes

I thought this maybe the case, but thank you for your input.