ProfiLux 2/3 firmware releases

[AQD_ottawa]

Profilux 3 Version 5.00i (only if you have upgraded to 5.00H first!!!)
- new
- reminder texts are shown more frequently
- files can be downloaded from the webserver with TFTP-GET
- webserver supports XML files
- better communication with intelligent cards (like PLM-DALI or PLM-4L)
- cloud simulation optimized
- known Bugs - none
- not yet supported
- level inputs of the Expansion Box
- analysis of the measured currents in Powerbar-PAB
- settings with Webserver, at present oly status display
- several network services
- PAB-administration over ProfiLuxControl, now only on the device
- 16 current pumps, at present only 4

Firmware
http://www.aquariumcomputer.com/Download/ProfiLux3_V500i.zip

Software
http://www.aquariumcomputer.com/Download/ProfiLuxControl_V5006.exe

ProfiLux plus II

Firmware
http://www.aquariumcomputer.com/Download/AllProfiLuxII_V500i2.zip (Beta)

Software
it is not possible to copy the settings to a 4.xx ProfiLux with 5.xx because there are too many and too large changes, the firmware is not compatible

Please do the update as described below:
- Save sensor data and settings with ProfiLuxControl II 4.xx
- Then update with ProfiLuxControl II to 4.xx firmware 5.00i
- Install ProfiLuxControl can handle 5.0.0.6 and use it to access ProfiLux (ProfiLuxControl 5.0.0.6 PII and P3)
- Correct settings

http://www.aquariumcomputer.com/Download/ProfiLuxControl_V5006.exe

As always first release are Beta we ask you to report to www.aquariumcomputer.com/forum if you have any remarks.

 

[hani]

Where can i get version 5.00h firmware?

 

[AQD_ottawa]

as always - in the download section

 

[hani]

i looked, there is a g and i i cant see any h version,
http://www.aquariumcomputer.com/System__E_/Download/download.html#Software

 

[AQD_ottawa]

H or higher in this case now i

 

[hani]

?? can you please tell me what to do to go from version 5.00g to 5.00i, i tried to do it but will not let me?

 

[AQD_ottawa]

We are creeping back into old habits

All support is on www.aquriumcomputer.com/forum

I will answer all questions in regards to support there.

 

[BigAl2007]

*bump*

Michael that link is broken...

 

[AQD_ottawa]

www.aquariumcomputer.com/forum

 

[BigAl2007]

thanks I found my error while going back through my history