Programming 2 x Jebao Power Heads Using Apex

[fltekdiver]

Anyone have the programming for running 2x Jebao Power heads through their Apex? I just bought an Apex, and have 2 x PP4 Jebao Power heads in my
RedSea Reefer 250

I'd like to be able to ramp one side up, then down to off, while the other side stays off, then the opposite side ramp up and down while the other side stays off

Also I would like to run a night mode, and Nutrient mode, and any other suggestions would be great

Thank you

 

[minus9]

Start here, that's what I did.
https://forum.neptunesystems.com/showthread.php?2039-jeabo-wp40-program&highlight=jebao+wp40

 

[McPuff]

I'm also in the process of setting up my jebao pumps with apex. These example threads are really useful. My advice is to find a basic programming example, then venture into virtual outlets to help randomize your flow a bit more. To me, that was very helpful and made it all much more understandable.

 

[thewbell]

Here is the code I used on mine. I copied it from another forum so I cannot take credit for writing it but it worked great for me. I loaded it all a few months ago and have since upgraded to Wav pumps so I don't have it running any more.

Profiles
[ Wave1a ] ( PF17 )
Type: Pump
Synchronize: Disable
Divide By 10: Enable
Initial Off Time: 0
On Time: 8
Off Time: 4
Minimum Intensity: 0
Maximum Intensity: 60
[ Wave1b ] ( PF18 )
Type: Pump
Synchronize: Enable
Divide By 10: Enable
Initial Off Time: 4
On Time: 8
Off Time: 0
Minimum Intensity: 0
Maximum Intensity: 60
[ Wave2a ] ( PF19 )
Type: Pump
Synchronize: Disable
Divide By 10: Enable
Initial Off Time: 0
On Time: 12
Off Time: 6
Minimum Intensity: 0
Maximum Intensity: 60
[ Wave2b ] ( PF20 )
Type: Pump
Synchronize: Enable
Divide By 10: Enable
Initial Off Time: 6
On Time: 12
Off Time: 0
Minimum Intensity: 0
Maximum Intensity: 60
[ Lt_Flush ] ( PF21 )
Type: Pump
Synchronize: Disable
Divide By 10: Disable
Initial Off Time: 30
On Time: 30
Off Time: 30
Minimum Intensity: 0
Maximum Intensity: 70
[ Rt_Flush ] ( PF22 )
Type: Pump
Synchronize: Disable
Divide By 10: Disable
Initial Off Time: 0
On Time: 30
Off Time: 30
Minimum Intensity: 0
Maximum Intensity: 70
[ DuskDawn ] ( PF23 )
Type: Pump
Synchronize: Disable
Divide By 10: Enable
Initial Off Time: 0
On Time: 8
Off Time: 4
Minimum Intensity: 0
Maximum Intensity: 30
[ Night ] ( PF24 )
Type: Pump
Synchronize: Disable
Divide By 10: Disable
Initial Off Time: 0
On Time: 10
Off Time: 15
Minimum Intensity: 30
Maximum Intensity: 30
[ Crest_1 ] ( PF25 )
Type: Ramp
Ramp Time: 1
Start Intensity: 20
End Intensity: 40
[ Crest_2 ] ( PF26 )
Type: Ramp
Ramp Time: 1
Start Intensity: 40
End Intensity: 60
[ Crest_3 ] ( PF27 )
Type: Ramp
Ramp Time: 1
Start Intensity: 60
End Intensity: 80
[ Crest_4 ] ( PF28 )
Type: Ramp
Ramp Time: 1
Start Intensity: 80
End Intensity: 100
[ Chopy ] ( PF29 )
Type: Pump
Synchronize: Disable
Divide By 10: Enable
Initial Off Time: 0
On Time: 4
Off Time: 2
Minimum Intensity: 0
Maximum Intensity: 65

Virtual Outlets

[ WP_Left ] ( base_Var1 )
Program Type: Advanced
Display Icon: Up/Down Arrows
Program:
If Outlet Crest_1_OSC = ON Then Crest_3
If Outlet Crest_2_OSC = ON Then Crest_1
If Outlet Crest_3_OSC = ON Then Crest_4
If Outlet Crest_4_OSC = ON Then Crest_2
If Outlet DuskDwn = ON Then DuskDawn
If Sun 120/-240 Then Wave1a
If Sun 240/-120 Then Wave1b
If Outlet DayLight = OFF Then Night
If Outlet Timer1 = ON Then Lt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2a
If Outlet Storms = ON Then Chopy
If FeedA 000 Then OFF
If FeedB 000 Then OFF

[ WP_Right ] ( base_Var2 )
Program Type: Advanced
Display Icon: Left/Right Arrows
Program:
If Outlet Crest_1_OSC = ON Then Crest_1
If Outlet Crest_2_OSC = ON Then Crest_2
If Outlet Crest_3_OSC = ON Then Crest_3
If Outlet Crest_4_OSC = ON Then Crest_4
If Outlet DuskDwn = ON Then DuskDawn
If Sun 120/-240 Then Wave1b
If Sun 240/-120 Then Wave1a
If Outlet DayLight = OFF Then Night
If Outlet Timer1 = ON Then Rt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2b
If Outlet Storms = ON Then Chopy
If FeedA 000 Then OFF
If FeedB 000 Then OFF


[ Timer1 ] ( Cntl_A1 )
Program Type: Advanced
Display Icon: Clock
Program:
OSC 120:00/010:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Outlet Sun = OFF Then OFF
If FeedA 000 Then OFF

[ Timer2 ] ( Cntl_A2 )
Program Type: Advanced
Display Icon: Clock
Program:
OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Outlet Sun = OFF Then OFF
If FeedA 000 Then OFF

[ Timer3 ] ( Cntl_A3 )
Program Type: Advanced
Display Icon: Clock
Program:
OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Outlet Sun = OFF Then OFF
If FeedA 000 Then OFF


[ DuskDwn ] ( Cntl_A9 )
Program Type: Advanced
Display Icon: Light A
Program:
Set OFF
If Sun 000/000 Then ON
If Sun 060/-060 Then OFF

[ DayLight ] ( Cntl_B8 )
Program Type: Advanced
Display Icon: Light A
Program:
Fallback OFF
Set OFF
If Sun 000/000 Then ON

[ Storms ] ( Cntl_B5 )
Program Type: Advanced
Display Icon: Up/Down Arrows
Program:
OSC 000:00/037:00/636:00 Then ON
If Time 19:30 to 13:59 Then OFF
Min Time 037:00 Then ON
If DoW S-T-T-S Then OFF



[ Crest_1_OSC ] ( Cntl_G1 )
Program Type: Advanced
Display Icon: Bars
Program:
OSC 000:00/000:02/000:06 Then ON
If Outlet DuskDwn = ON Then OFF
If Sun 120/-240 Then OFF
If Sun 240/-120 Then OFF
If Outlet DayLight = OFF Then OFF

[ Crest_2_OSC ] ( Cntl_G2 )
Program Type: Advanced
Display Icon: Bars
Program:
OSC 000:02/000:02/000:04 Then ON
If Outlet DuskDwn = ON Then OFF
If Sun 120/-240 Then OFF
If Sun 240/-120 Then OFF
If Outlet DayLight = OFF Then OFF

[ Crest_3_OSC ] ( Cntl_G3 )
Program Type: Advanced
Display Icon: Bars
Program:
OSC 000:04/000:02/000:02 Then ON
If Outlet DuskDwn = ON Then OFF
If Sun 120/-240 Then OFF
If Sun 240/-120 Then OFF
If Outlet DayLight = OFF Then OFF

[ Crest_4_OSC ] ( Cntl_G4 )
Program Type: Advanced
Display Icon: Bars
Program:
OSC 000:06/000:02/000:00 Then ON
If Outlet DuskDwn = ON Then OFF
If Sun 120/-240 Then OFF
If Sun 240/-120 Then OFF
If Outlet DayLight = OFF Then OFF

 

[fltekdiver]

Thanks guys I appreciate it, these few links and threads will get me started , then I can tweak it, thanks again