I set up a new 90G tank with a sump. All the plumbing below has been working for over a week now, but I have done nothing but fight with the skimmer in the sump. I first tried using my reef octopus hang on because it was expensive, but it was too big. The tank came with a Coral Life 125G I believe. Hang on or in sump. I have tried numerous pumps and things to get it to work. The latest is a RIO 1400, which does fine pumping the water through, my question is, where does the air line go? I have the line from the pump going to the small little canister on the skimmer as the instructions say. There is another nipple for air above the return line, which I believe isnt used? The problem I am having, is the air line just sucks up water, fill up the little canister and comes out the other nipple on the canister. For the life of me I can't get bubbles or foam out of this. Its gotten very frustrating. Poor fish have had no skimming!
Protein Skimmer in Sump?
- Thread starter Dneon95
- Start date
vhuang168
New member
The air silencer sits pretty high up, how deep under water is it?
Read the manual? If you don't have it, here it is.
http://www.coralifeproducts.com/Files/Product/1-coralife-skimmerinstructions-new-style-revise.pdf
Read the manual? If you don't have it, here it is.
http://www.coralifeproducts.com/Files/Product/1-coralife-skimmerinstructions-new-style-revise.pdf
Yeah I have read the instructions many times, it doesn't say much about the tube. The silencer sits up high on the Skimmer, then I have the air line running down to the pump. Maybe don't connect it to the skimmer at all, and just let the air tube hang over the side like he mentioned directly from the pump. That might work, I wouldn't be using the air silencer on the skimmer then. Anything to get this thing to skim and start to foam.
Similar threads
