Radion G2 slightly on

[xsquyz]

There isn't much information on this issue but I have noticed my radion g2 LEDs slightly dim after light schedule is off. You would have to look directly under it to see that it is still on .

Is there any thing I'm over looking?

 

[SkimHeavy]

I think you need to calibrate the lamp with the ESL tool.

 

[Alex Y EcoTech]

xsquyz,

To correct the issue, you will need to perform a calibration on that Radion. Please follow the below steps to complete the calibration:

1. Power on all Radions
2. Connect via USB to a single Radion
3. Start the Connection Manager and open ESL
4. Select the "Wrench" icon below Radion 1
5. Next select "Calibrate"
6. Proceed through the calibration
7. Repeat steps 5-6 for each Radion

 

[xsquyz]

Thanks, I didnt realize you'd have to answer the questions multiple times before it is calibrated.

I will try it again when I get home.

 

[xsquyz]

I finished the calibration and after answering more than 20+ times, it still have the same residual glow. See picture attached.

Also, I noticed that there are 5 leds per unit that does not come on. Aren't they suppose to be UV?

 

[WeMa]

G2s only have 16 LEDs per cluster, none of which are UV. Those are only on the pro version of the light.

 

[xsquyz]

WeMa,

Thanks for the response. I understand they are only for Pro version. Just curious why they the cluster would have leds that don't actually come on.

 

[WeMa]

Im pretty sure the LEDs aren't there, just the indentation in the lens. I upgraded from g1 w/ tlr to pros and thought the same thing at first. What I believe they do is use the same lens on both lights, not 100% sure tho.

 

[Alex Y EcoTech]

xsguyz,

I would recommend calling in or emailing for further troubleshooting.