Received my TS24...have a question

jond

Member
I received my order and am familiarizing myself before I setup. My initial question is on the photocell for night mode. Is it built into the multi-controller?

There is just the one hard wire attached to the controller that appears to be the moon light. Is the photocell contained in the same area?

Thanks for the help.
 
I can answer that one for you.
If your talking about the 7095 yes the photoeye and moonlight are on the same piece the moonlight is actully at the very end.

The photoeye is built into the controller and the controller should have a button at the top right to turn either one or both on depending what you like.

Truthfully I'm not real impressed with the moonlight so my controller takes care of that for me photoeye is awesome though

Good Luck ;)
 
Oh ya, where the transformer plugs into the small black box on the cord that goes to the pump there is a small dial. Where should this be set when using the 7095?
 
If this is the driver box your talking about then that is your personal preference. Mine are set to max but on smaller systems they can be turned down if need be.
I actually bought mine from a fellow reefer here and got the 6080 props to even lower the flow that much more. I switched back to the 6000's prop because I needed the flow. Hopefully I can upgrade the transformers to the 6100's.

As for the help Your very welcome, I got mine and had to play with them to really learn what they do. :lol:

Ask away and I or someone else will try and help
 
Okay. And is it correct to be using just two attachment pieces with the magnet holders? One peice slides down on the magnet holder and then the swivel arm attached to the pump?
 
Not sure I understand the question fully but if your looking at the magnet, there should be a piece that slides down and then the pump has a round bracket with a hole these all go together and should work
 
Back
Top