I've had nothing but issues with this skimmer. I've owned it for amost a year now, and I'm about ready to toss the thing out the window! I have it at the recommended water level (which doesn't fluctuate in my sump). It seems to work fine, and then out of the blue it's overflowing back into my sump. I can unplug it and plug it back in and it works fine for a few more hours/days?
I've removed it several times to clean & inspect it, and noticed the o-ring that's between the pump and the skimmer body has been pushed into the skimmer chamber (not sure if this was the issue) i glued it in place thinking perhaps i finally solved my issues. Well, after running the skimmer with no issue for 3 - 4 days, I checked and sure enough it was overflowing once again! I removed the skimmer to check the o-ring, but it was still in it's proper place. Anybody have any suggestions, or experiencing this same issue? btw....No chemicals are getting into the water that may act up the skimmer.
I've removed it several times to clean & inspect it, and noticed the o-ring that's between the pump and the skimmer body has been pushed into the skimmer chamber (not sure if this was the issue) i glued it in place thinking perhaps i finally solved my issues. Well, after running the skimmer with no issue for 3 - 4 days, I checked and sure enough it was overflowing once again! I removed the skimmer to check the o-ring, but it was still in it's proper place. Anybody have any suggestions, or experiencing this same issue? btw....No chemicals are getting into the water that may act up the skimmer.
