Replacement Pump for Reef Dynamics INS135

[fio1022]

Hi,
I have a Reef Dynamics INS135 skimmer that has not been in use for a year or so.
I had plans to use it on a 90g and the impeller is shot.
The pump is an ECOPLUS1056 but I cant locate a replacement needle wheel impeller for it.
Any suggestions on a replacement pump or impeller??

 

[moondoggy4]

https://www.google.com/aclk?sa=L&ai...ioqemTy6zmAhUiq1kKHQqHA_0Q9aACegQIDxBA&adurl= One of these will do.

 

[fio1022]

Thanks for the reply.
That pump looks good except it doesnt look like there is a venturi fitting.
Any other suggestions?

 

[Vinny Kreyling]

Looks like you put on your volute & needle wheel with that pump Jim.

 

[fio1022]

When you say volute,are you referring to to the venturi fitting?
If so its glued to front hosing

 

[Vinny Kreyling]

The entire front housing is the volute as far as I know.

 

[moondoggy4]

https://www.aquacave.com/tunze-hydrofoamer-9420-silence-pump.html Basically the same pump you could buy this bits and put it on that pump.

 

[moondoggy4]

https://www.amazon.com/Sicce-SK400-...SYSCPMN9Q05&psc=1&refRID=AT36D578TSYSCPMN9Q05 This pump should work as well. Make sure it has the grey magnet on the impeller,