RKE Help - Calling all DA experts

[Flagswipe]

I hav ebeen using the DA Reef Keeper Elite for many years now. Have been running the old software/firmware with no issues. Last week I bought a Remote Display so I could work in the basement and make changes instead of running up and down. So here is the problem
The new RD has 2.0 on it so it will not work with my system as is, I have to update to My Reef and 2.0 on every module (I am assuming)
SO I get my old SID flashed to the newer version at a local shop (FADELLE)
I then download My Reef and install it. Then follow the instructions but cannot make it work, keep getting errors
Getting pretty nutty frustrated here.

Hope someone anyone will help

I have an older sid that I sent out to be flashed to 2.01

I downloaded My Reef and plugged the sid in
the software sees it and says it must be updated to 2.08 - this is in red
I hit update and it goes to the program screen
there is however no "program" but there is a verify button
Hit verify and the progress bar starts
goes about 1/5th of the way then get an error
the error says @1117

Obviously I cannot update anything else as I cannot get the SID working

My reef also shuts itself down as it has when have been typing this

Any help would be appreciated

Started on Laptop, installed, had problems so deleted, re installed and re booted. Same issue

Moved to my PC installed fresh and still having the same issue

 

[Pearson]

I had the same issue.

Make sure you're only working on the SID and it's not connected to any other modules. I had to remove the cable from the Sid and connect it back a couple more times before it read. Make sure the connection is in tight.

Sorry I'm not a lot of help but hopefully you get it figured out.