RO/DI and water pressure?

[PhishEDELIC]

Hey I got a question for all my RO/DI users. I have a Kent Marine Deluxe Hi-S Maxxima 60 GPD RO/DI System. My RO/DI unit is running on my slop sink in my basement were my tank use to be. Now I've moved the tank one floor up. If I ran the clean water out tubing 12ft vertically through my floor will that cause any problems. Do I have to worry about back pressure or poor water production? Right now my waste water goes into the sink and clean water into a rubbermaid bucket on wheels next to the sink. My goal is to keep the RO unit in place and just move the rubbermaid buck up on floor. Any help would be great.

 

[Plato]

No, 12 feet should not make any problems. If you have a 4:1 ratio at the sink just make sure it about the same in the different location. Have a friend give you a hand use your cell phone and a timer and measure the ratio and you should be good to go.