*searching* firefish and 65 gal+
- Thread starter pat0588
- Start date
hansnfrans
New member
I am going to be breaking down my 65 gal tank in the next couple of days and will be looking to sell it. It is drilled in one end of the tank to be set up as a peninsula-style tank. It has a knick on one of the corners that does not effect its structural integrity whatsoever. The knick could be easily covered up with a piece of black plastic corner trim (that is what I was originally intending on doing before deciding to take the tank down). I am looking to get $40 for it. (also willing to trade for zoas and possibly other types of corals).
hansnfrans
New member
I'm in 60148 (Lombard). I can get some pics up shortly...
hansnfrans
New member
The tank is drilled for 2 returns and 1 drain. On the side that's plumbed, there is a heavy duty black vinyl sticker that serves as the background.
hansnfrans
New member
I was using this tank in the common configuration (not as a peninsula) as you can see here. The black background seen here was merely painted on (latex) and can easily be completely removed with your fingernail. This is unlike the background on the plumbed side, that as I mentioned, is heavy duty vinyl
hansnfrans
New member
Here's a close up of the knick. 
hansnfrans
New member
The plumbing is set up for a sump (if that's what you are asking...?). The knick doesn't effect the tank (other than aesthetically) , so I had originally intended to use acrylic corner trim to cover it up, seen here on this page: http://www.glasscages.com/?sAction=ViewCat&lCatID=43
hansnfrans
New member
I had it drilled by a saltwater tank maintenance company. I imagine you could just turn the tank around and then the plumbing would be on the left and should fit your needs. I just took the tank down and am about to hose it out now.
hansnfrans
New member
I will post a pic after its cleaned up.
hansnfrans
New member
Thursday during the day should work. What time were you thinking? Also, here's a pic of the tank after cleaning. 
