Set Up Question

[svb57]

I have a 7095 controller with (2) streams and a wavebox. They are going into a 300g reef tank.

Question is where do i put the Streams in relation to the Streams or do I not need to use the wavebox with the Streams on the controller.

I have another wave box on a 180g tank that I can slave with the wave boox on the 300g if this would work better.

Suggestions.

Thanks
Jim Mc

 

[rvitko]

The 7095 cannot control the wavebox, the wavebox will need its own controller and you will need one controller 6091 or 7092 per tank with a wavebox since the timing will not be the same on two different tanks. In general the Streams will go in each back corner aimed across the tank in an X pattern and the wavebox will go one side aimed down the length of the tank. I would set the wave before turning on the Streams.