Setting for multi controller with 3 Tunze 6100?

[fishcraze2002]

I got the third Tunze 6100 this past week Now, what is the right or best setting (on the controller) to get the most wave action out of the 3 pumps? is there an online instruction forthis? I lost the instruction page from my multi controller kit (7094).

I also noticed that since I hooked the 3rd 6100 to the controller, one of the older 6100 seemed to act a little weird. It seemed to try to kick on but the stop real quick - i see the blade turn quick and stop immediately (i can even hear the noise when it tried to start). It would do that one or two time then finally will kick on and run it cycle, then stop. Shortly after that, it would try to start again but failed one or two time as described, and then started smoothly..

 

[CoralBarn]

When was the last time you cleaned it ? That may be all it needs.

 

[fishcraze2002]

about 2 months ago.. i'll clean it today to see if that solves the problem

 

[rvitko]

fishcrraze, that may be normal, the newer pumps turn one rotation every 20 seconds when off to scare fish away, it sounds like you are using an intterval 1 program and so while the pump is on it runs and while off it turns once every 20 sec.

 

[Lutefisk]

Is there somewhere we can download the instructions for the 7094 multicontroller?

 

[rvitko]

I can email them to you, Do you mean 7095 as 7094 isn't made anymore?

 

[Lutefisk]

I do mean the older model.

 

[fishcraze2002]

Roger, thanks for the reply. yeah, that makes sense now - i don't know if it scrared the fishes but it did scare me the first time since i thought my Tunze broke

Could you send me the instruction for 7094? I gave you my address on the other PM about the new magnetic holder with the new swivel..? What is your recommendation for the setting to get the best waving effect out of 3 Tunze 6100 ( and a separate 6080) in my tank? The tank dimension is 72x24tallx30wide (220gal). I mount 2 tunze on each side of the tank.. Thanks.

 

[Darkreefer]

Fishcraze,

You can download them here.

http://www.tunze.com/usa/en-gb/dept_172.html

 

[Lutefisk]

Thanks Darkreefer

 

[fishcraze2002]

Thanks a bunch, Darkreefer.

 

[Lutefisk]

The link on the other page isn't working for me.

You can find the 7094 manual at this link: http://www.tunze.com/sonstiges/gebrauchsanleitungen/x7094_8888.pdf