SimuL stick assistance needed?

[SeanT]

I searched for help to my problem and did find this thread , however I haven't been able to fix my problem.

I hooked up a simu L stick to L5/6 (expansion card) and it worked great, nice blue/white light.
The other day I used a splitter to hook up a second Simu L stick through the same L port via a splitter with a 2.5 meter cable.
When they came on the red lights were on.

As I said I searched and found the above thread.

So I plugged them into L1/2 to program them AND used a 1 meter cable.
Then I put them back in the L5 and the same thing happened.

Granted, I did not use them in L1/2 only in L5/6.

Do Simu L sticks need to be controlled via L1/2 to work properly?
If so, no big deal, just checking before I switch everything.

Thank you,
Sean

 

[AQD_ottawa]

If you go to 1-10V interface in the profiLux software then click on program LED you can switch the channels, the second one has a reversed channel.

 

[SeanT]

I went there and there is no box to tick for switching channels.
Just deals wth flashes, deep blue moonlight etc.

 

[AQD_ottawa]

first box in the list states

"swap channels"

Read chapter 3.16.12 it will give you full direction there, if you still cant find it email me and i will send you a screen shot.