Someone please please check my AC jr program

[raskal311]

First time programming this thing, can someone please take a look and let me know what I need to change.


PH1$ (powerhead 1)
FAN$ (Fans)
CA1$ (Cal Reactor Solenoid)
FUG$ (Fuge light)
ALR$ (Alarm)
SKI$ (Skimmer)
PH2$ (Power head 2 and 3)
HET$ (Heater)
MHL$ (MH leftside)
MHR$ (MH right Side)
VHO$ (VHO)
CHI$ (Chiller)


If Time > 14:00 Then VHO ON (VHO on at 2pm)
If Time > 15:30 Then VHO OFF (VHO OFF at 2:30pm)
If Time > 21:40 Then VHO ON (VHO on 9:40pm)
If Time > 22:30 Then VHO OFF (VHO OFF 10:30pm

If Time > 15:15 Then MHR ON (MH Right ON 3:15PM)
If Time > 21:45 Then MHR OFF (MH Right Off 9:45PM)
If Time > 15:20 Then MHL ON (MH Left On 3:20PM)
If Time > 21:50 Then MHL OFF (MH Left OFF 9:50PM)
If Temp > 85.00 Then MHL OFF (MH left off if temp hits 85)
If Temp > 84.00 Then MHR OFF (MH right off if temp hits 84)
If Temp > 84.00 Then ALR ON (alarm on if temp its 84)
If Temp < 83.00 Then ALR OFF (alarm off if temp is blow 83)
If Temp > 79.00 Then FAN ON (Fan on at temp 79+)
If Temp < 79.00 Then FAN OFF (Fan off at temp blow 79)
If Temp > 80 Then CHI ON (Chiller on at temp 80+)
If Temp < 80 Then CHI OFF (Chiller off at temp 80-)
If Temp < 75 Then HET ON (Heater On at temp 75+)
If Temp > 76 Then HET OFF (Heater Off at temp 76+

If pH > 8.40 Then ALR ON (alarm on if Ph 8.4+)
If pH < 7.95 Then ALR ON (alarm on if Ph 7.95-)
If pH > 08.30 Then CA1 ON (CA Solenoid Off if PH 8.3+)
If pH < 08.10 Then CA1 OFF (CA Solenoid On if PH 8.1-)

If Feed cycle Then PH1 OFF
If Feed cycle Then PH2 OFF
Max Change 010 M Then PH1 OFF (PH1 back on after 10min of feed)
Max Change 010 M Then PH2 OFF (PH2 and 3 back on after 10min of feed)

If Time > 00:00 Then SKI ON
If Feed cycle Then SKI OFF
Max Change 010 M Then SKI OFF (skimmer off 10 after feed)

If Time > 01:30 Then FUG ON (fuge light on at 1:30am)
If Time > 07:30 Then FUG OFF (fuge light off at (7:30am)

 

[laverda]

I only see two lines wrong. You might want to post it in the Neptue Forum. You will get more replys there.
If pH > 08.30 Then CA1 ON (CA Solenoid Off if PH 8.3+)
-Should be -----If pH > 08.30 Then CA1 OFF
If pH < 08.10 Then CA1 OFF (CA Solenoid On if PH 8.1-)
-Should be -----If pH < 08.10 Then CA1 ON

 

[raskal311]

ok I think the notes are wrong the the programming is correct.