Spring cleaning...

gbtower

New member
$600 8'x2'x2' (~240g) all clear acrylic tank. Has scratches. No overflows or holes drilled in sides or bottom.

$100 Partially completed stand for above tank. 32" tall. All plywood painted white. Needs skin and/or doors.

$550 Barr Aquatics SK5000 (?) - Older model (2 yrs old), so it doesn't have the twist locks. Also, assembled by myself (but all parts machined by Brent), so the edges are unfinished (i.e. not flame or hand polished). Used only on test tank, but works brilliantly. Was going to use on the tank mentioned above.

$150 Iwaki 55 RLT - Got from someone else, so don't know how old. Noticeable corrosion on exterior but also works perfectly, especially with above skimmer.

$140 MRC Nilsen - 2+ yrs old.

$120 AquaC Remora w/ skimmer box + MJ1200 - Also from someone else, so no age. Still in use on current tank, but will be taken down shortly.

$60 PFO standard tar ballast (non-HQI) - 4+ yrs old, but hasn't been used in the last 3 yrs.

$60 20g W/D sump - 5+ yrs; Approximately 30x12x12 with divider in center, 1" bulkhead in bottom corner, drip plate, but missing eggcrate. Looks a lot like the CPR CR1000, but can't remember any specific name to it. Some large scratches, but it's a sump. Will even toss in the bioballs :)

$20 SCWD - got 2 of these (non-leaking, of course)

$15 2mm mylar sheet - roll 15+' x 50"

Pickup only for now.
 
Some pix + details:

Some pix + details:

tank + stand (with lots of junk):
4019240tank.jpg

Tank is laying on its back and front (top) is protected with styrofoam insulation. Stand is 1" ACX DF ply with 2 cutouts in front (only 1 visible in pic) and 1 cutout to the left. Painted with exterior latex. Correction to original post: tank is 39" tall.


sk5000 protein skimmer ( a little dusty):
4019sk5000.jpg



iwaki 55:
4019iwaki55.jpg



mrc standard size (6" diameter by 22" tall) nilsen reactor:
4019mrcnilsen.jpg



sump (forgot to put the drip tray and bioballs back in for the shot):
4019sump.jpg
 
Back
Top