Streams and wavebox setup. Best Practice

[GummyBear]

Hi Guys,

I have the ts24 kit, 1 6200 and 1 wavebox. Currently I have 2 streams 6200 and 1 6100 on oneside of the tank and the wavebox and 1 6100 on the other. My tank is 210 gallons All-Glass. What is the best way to get the most out of my wavebox. I tried putting the 6100 on the wavebox side to the Aux of the wave box. I am getting ok waves nothing special though. I have the 7095 set to interval 2 set to pulse at 100% and run at 30% when the wave box kicks on. Any suggestions on how to get the best wave on this size tank. Shorter or longer on the wavebox controller and and recoomendations for the wavebox controller was well. I thought someone told me their was a dip switch I had to set when putting the stream to the wavebox but I did see any dip swtches on it.

Thanks

 

[rvitko]

There is a jumper inside but it comes preset for connecting another pump on the same side. You need to very slowly turn the knob in small increments until you get the correct frequency for your tank. Every tank has it's own unique frequency which will produce a wave. It will be a single wave crest on one side trough on the other and on a 6ft tank it should be at least 1" high.

 

[GummyBear]

do you suggest putting the 6100 on the same side as the wavebox or the opposite side. Keep in mind I have 2 other streams 1 more 6100 and 1 6200. Currently i have the 6100 that is hooked up to the wavebox controller on the same side as the wave box. Thanks

 

[rvitko]

Yes, I would keep the majority of your flow coming from the same direction as the wavebox with a weaker flow coming against it.