What else do I need? I know I might need a chiller/heater but I want to monitor the temperature first so I know what size to get. BTW, I live in Hawaii so the temperature doesn't fluctuate too much. The floor will be filled with concrete with a drain and water feed. I will also have dedicated GFCI outlets installed. We also have a 24k BTU split air conditioner in the room which runs almost 24/7. I came up with this design in case we move house and use it at a room divider. The background will be removable and the wood sides will be removable to see if there are any problems with the overflows. This is what I came up so far and I'm almost ready to order.
Tank: Acrylic 96" x 30" x 30"
Stand: 96" x 30" x 40" tall
Overflows on each end
Canopy: 96" x 30" x 15" tall
Sump/refugium: 60" x 26" x 20" tall
Skimmer: Euro-Reef RC500 (comes with three Eheim 1262 pumps)
Wavemaker: Tunze Turbelle TS24
RO/DI: SpectraPure MaxCap 90gpd
Calcium Reactor: Korallin C1502 (comes with one Eheim 1048 pump)
Lighting: PFO Solaris H4 72"
Lighting/refugium: Current USA 10k/460nm single 20"
Return Pumps: Two Eheim 1262
Dosing System: SpectraPure LiterMeter III with continuous water change and auto top off modules
Controller: Neptune Aquacontroller 3
Tank: Acrylic 96" x 30" x 30"
Stand: 96" x 30" x 40" tall
Overflows on each end
Canopy: 96" x 30" x 15" tall
Sump/refugium: 60" x 26" x 20" tall
Skimmer: Euro-Reef RC500 (comes with three Eheim 1262 pumps)
Wavemaker: Tunze Turbelle TS24
RO/DI: SpectraPure MaxCap 90gpd
Calcium Reactor: Korallin C1502 (comes with one Eheim 1048 pump)
Lighting: PFO Solaris H4 72"
Lighting/refugium: Current USA 10k/460nm single 20"
Return Pumps: Two Eheim 1262
Dosing System: SpectraPure LiterMeter III with continuous water change and auto top off modules
Controller: Neptune Aquacontroller 3
