Cheekymonkey
Premium Member
My new stand, sump and fuge are on the way from Davy, all custom made to my odd needs...
So I am going to presell my sump and fuge and stand. I don't expect to be paid until it is picked up, but I would like to line up buyers.
The sump is 15 tall, 14wide and 25" long. Made of 3/8's acrylic. There is one large section followed by a baffle and sponge holder and a return pump area.
There is also a bulkhead in the lower end of the return area so an out of sump pump can be held there. Because there is 3/8" acrylic there is no eurobracing, which makes all the space usable. The large section has small tabs on the inside for holding shelves for filter socks, wetdry, or skimmer platforms.
I am asking $100 for the sump.
The Fuge is really really cool. Odd but cool. It was custom made for me by Davy. The dimensions are 20x14x28tall. There is one baffle on the intake side so the bubbles don't fill the fuge, the baffle forces the water to the bottom of the fuge, I current run a DSB in there, along with shelves of LR, and on the top I allow Chaeto to grow. This thing is a POD FACTORY! The overflow of it is near the top so the water is forced to flow through the whole fuge, this thing is just excellent, sad to get rid of it, but it isn't going to fit in the new plans. Comes with the bulkhead.
I am asking $200 for this macro algae and pod factory.
Lastly I am selling my Tank Stand
Black stand, plywood, nice molding too large doors in front, with no center brace in the front only in the back. So very accessible. Has seen a little bit of water, but always immediately dried so no damage has really occurred. Made to hold a 48x24 tank, currently holding a 120G. The stand totals 38" tall, but the tank sits on it at 36".
Asking $200 for the stand.
So I am going to presell my sump and fuge and stand. I don't expect to be paid until it is picked up, but I would like to line up buyers.
The sump is 15 tall, 14wide and 25" long. Made of 3/8's acrylic. There is one large section followed by a baffle and sponge holder and a return pump area.
There is also a bulkhead in the lower end of the return area so an out of sump pump can be held there. Because there is 3/8" acrylic there is no eurobracing, which makes all the space usable. The large section has small tabs on the inside for holding shelves for filter socks, wetdry, or skimmer platforms.
I am asking $100 for the sump.
The Fuge is really really cool. Odd but cool. It was custom made for me by Davy. The dimensions are 20x14x28tall. There is one baffle on the intake side so the bubbles don't fill the fuge, the baffle forces the water to the bottom of the fuge, I current run a DSB in there, along with shelves of LR, and on the top I allow Chaeto to grow. This thing is a POD FACTORY! The overflow of it is near the top so the water is forced to flow through the whole fuge, this thing is just excellent, sad to get rid of it, but it isn't going to fit in the new plans. Comes with the bulkhead.
I am asking $200 for this macro algae and pod factory.
Lastly I am selling my Tank Stand
Black stand, plywood, nice molding too large doors in front, with no center brace in the front only in the back. So very accessible. Has seen a little bit of water, but always immediately dried so no damage has really occurred. Made to hold a 48x24 tank, currently holding a 120G. The stand totals 38" tall, but the tank sits on it at 36".
Asking $200 for the stand.
