Since I have taken down all my tanks, I have some equipment to get rid of.
First is a drilled 40b with a 20L sump. The overflows I made are included but I had to cut them off because there was trapped water on the ends. The tank may need some silicone touchup where I cut them off. Has 2 - 1" BH holes and 2 -3/4" BH holes- I will throw in a tube of RTV 100 Black silicone to seal them back on. I have a 3'- 4 bulb Nova Extreme T5 unit with fans. I have replaced one ballast already but the other is dead and needs to be replaced. Comes with used ATI bulbs.
I will do the combo 40B, sump and the 4 bulb light for $120 OBO
3 tank acrylic unit. I had used it for my fry tanks and is really a nice space saver! Each tank as 15 1/2" w 11 3/4" D x 12 1/2" high (All I.D.) Makes them about 10g each. The unit is 48" x 12 1/2" D x 13 1/4" H overall. I bought this unit from a member few years ago. It has bulkhead holes in the back, the lower one has been sealed but you could re-drill it to put it in. The acrylic has light scratches and I would not consider this a display tank unless you put the time in to buff it out. Not really that bad with water in it. Comes with the water return 3/4" bulkheads in place. I do not have the 1" bulkheads for the rest of the holes -- $50 obo
I have a 4'- 2 bulb Current T5 model 1126, no fans. Bulbs are ok, $50 obo
12 T5 waterproof retro bulb ends
Used, with bases. They are not all the same looking but all are the same size.
$70 OBO
Please only serious inquiries only. The sale of the 40b combo was never followed through on and I wasted almost 2 weeks waiting for the buyer. If you want me to hold it for up to 1 week, I'll need 1/2 down via PayPal. PM me or post here. I will separate the combo
40B- $30
Sump $10
4 bulb light - $90
Thanks for taking the time and have a safe holiday season!
First is a drilled 40b with a 20L sump. The overflows I made are included but I had to cut them off because there was trapped water on the ends. The tank may need some silicone touchup where I cut them off. Has 2 - 1" BH holes and 2 -3/4" BH holes- I will throw in a tube of RTV 100 Black silicone to seal them back on. I have a 3'- 4 bulb Nova Extreme T5 unit with fans. I have replaced one ballast already but the other is dead and needs to be replaced. Comes with used ATI bulbs.
I will do the combo 40B, sump and the 4 bulb light for $120 OBO
3 tank acrylic unit. I had used it for my fry tanks and is really a nice space saver! Each tank as 15 1/2" w 11 3/4" D x 12 1/2" high (All I.D.) Makes them about 10g each. The unit is 48" x 12 1/2" D x 13 1/4" H overall. I bought this unit from a member few years ago. It has bulkhead holes in the back, the lower one has been sealed but you could re-drill it to put it in. The acrylic has light scratches and I would not consider this a display tank unless you put the time in to buff it out. Not really that bad with water in it. Comes with the water return 3/4" bulkheads in place. I do not have the 1" bulkheads for the rest of the holes -- $50 obo
I have a 4'- 2 bulb Current T5 model 1126, no fans. Bulbs are ok, $50 obo
12 T5 waterproof retro bulb ends
Used, with bases. They are not all the same looking but all are the same size.
$70 OBO
Please only serious inquiries only. The sale of the 40b combo was never followed through on and I wasted almost 2 weeks waiting for the buyer. If you want me to hold it for up to 1 week, I'll need 1/2 down via PayPal. PM me or post here. I will separate the combo
40B- $30
Sump $10
4 bulb light - $90
Thanks for taking the time and have a safe holiday season!
Last edited:
