TTM help
- Thread starter Chriss614
- Start date
scooter31707
New member
Here is the steps and advice for TTM. Also you will need an additional heater, air tubing, and air pump.
http://www.reefcentral.com/forums/showthread.php?t=2388428
http://www.reefcentral.com/forums/showthread.php?t=2388428
Mishri
Active member
you should only need 1 air pump, I think scooter meant air stone.. anything that gets wet needs to be dried (or submerged in freshwater for 3 hours) http://www.int-res.com/articles/dao/1/d001p019.pdf that's the study where the 3 hours in freshwater was found to be lethal.
scooter31707
New member
No, I said it right. He already has the airstones. I stated he needed an additional heater, air tubing (to connect the airstone to the air pump) and air pump (no s on the end; so not plural; meaning a single air pump).
Tanthaitrung
New member
You can reuse the air stones. After transfer, I usually rinse the air stones with tap water, boil them twice and dry in few hours, then connect to the air pump for a day to make sure they are fully dry.
You should do TTM in another room from DT
Best of luck
You should do TTM in another room from DT
Best of luck
Achilles Torben
Member
Sorry I will hook up this treat.
I dry my equipment by a big electrical air heater. So after one day can't find any drops of water. I do it one more day. So it is sure that all zyst are destroyed?
I thought about cooking the running system by electrical heater. Which temperature I have to rise to kill everything and how long.
Or I can do it with freshwater?
What's about Oodimium? TTM also works? I transfer fish all 2 till 3 days
Grüße Torben
Gesendet mit Tapatalk
I dry my equipment by a big electrical air heater. So after one day can't find any drops of water. I do it one more day. So it is sure that all zyst are destroyed?
I thought about cooking the running system by electrical heater. Which temperature I have to rise to kill everything and how long.
Or I can do it with freshwater?
What's about Oodimium? TTM also works? I transfer fish all 2 till 3 days
Grüße Torben
Gesendet mit Tapatalk
To cook the equipment the water needs to be 100 celcius and then I would boil for around 20 minutes. Repeat twice and then run the airstones on the airpump for 24 hours to dry them completly.
Anyone feel free to correct me if I am wrong as this is just my interprutation of what people have told me.
Sent from my LGMS428 using Tapatalk
If you would like my reply in german I would be happy to translate it as I happen to speak german.
Sent from my LGMS428 using Tapatalk
