Tunze advice

[Hammsreefbeer]

How would i set up 1 6055 w/ 7095 on a 60g cube.I just need to know the best way to set up my controller w/ only 1 PH.Ive got it on pulse now but have been playing with it a little the last few days.
thanks

 

[rvitko]

Pulse is the only option for 1 pump operation so the only adjustments you could make would be to pulse speed.

 

[Hammsreefbeer]

interval dail doesnt work on pulse function at all?

 

[rvitko]

Interval is the time between 2 pumps, without 2 pumps you can't use it.

 

[Hammsreefbeer]

ok cool.I figured but wasnt forsure.i thought it set the time between pulse too.
thanks Roger

 

[rvitko]

The pulse time is set by the pulse knob 1-7 seconds is the range and typically 3-4 seconds works best.

 

[DiscusHeckel]

The pulse time is set by the pulse knob 1-7 seconds is the range and typically 3-4 seconds works best.

Hi Roger,

What is the best option for pulse speed please? My current set up (1-pump set up) changes the speed of my single pump between full power and 30%.

Thanks

 

[rvitko]

The point of pulsing is for fast water and slow water to collide and make a broader flow due to the impact and turbulence, a very rapid pulse means the pumps will not reach max and min power, a slow pulse results in less turbulence and less broad flow, typically the middle range of 3 seconds is ideal, for a longer tank you can use a longer pulse for a shorter tank a shorter pulse as the water doesn't have as far to travel.