Tunze Multicontroller 7095 Help!!!

[SHAWNLX86]

I'm setting up my Tunze multicontroller 7095 with 2 6100 pumps. What settings do people use on multicontroller and what plugs do you plug pumps into 1 and 2, 2 and 4, etc...

Thanks in advance, Shawn

 

[gixxer600]

I have mine set at interval #2. 40 min and 100 max at 1 minute intervals. I think they are plugged into 1 and 3.

 

[sdesi2005]

SHAWNLX86
Where are you located? What size tank are you hooking this system on? Sorry to hijack, I'm looking at the same system.

Where did you get it from?

 

[jnb]

you should consider posting this to the tunze forum and you will get focused help

 

[jnb]

I use far left then far right ports
i use night mode with led (both green leds become lit
I have lower knobs set at 30% next top at 100% pulsing set at 5 seconds
interval 2 (keeps both pumps running and recommended by tunze to keep build up less) interval set at 6 hours (switches from one side to other) so that one is running every 6 seconds 30/100% and the other pump is running 30% and this switches to the other pump after 6 hours

this is most liekly what roger will tell you (from tunze) based on my experience and I like it

 

[SHAWNLX86]

<a href=showthread.php?s=&postid=9629094#post9629094 target=_blank>Originally posted</a> by sdesi2005
SHAWNLX86
Where are you located? What size tank are you hooking this system on? Sorry to hijack, I'm looking at the same system.

Where did you get it from?

I live in S. Dartmouth, MA
Its getting hooked up to a 215rr Oceanic w/ Starfire front panel

I got it from www.Saltycritter.com