Using Old Rock
- Thread starter Bmore88
- Start date
You can also cook your live rock in a trashcan for a few months with lots of swishing. I did that once and it really worked well for me. Here are the instructions copied from another thread:
The first step to this is commitment.
You have to be willing to remove your rock from the tank.
It doesn't have to be all at once, but I feel if you are going to do this do it all. In stages if that is easier but make sure that all of it gets done.
The new environment you are creating for your rock is to take it from an algal driven to a bacterial driven system.
In order to this, the rock needs to be in total darkness to retard and eventually kill the algae's on the rock and to give the bacteria time to do the job.
So basically you need tubs to hold the rock.
Equipment needed.
1. Dedication.
2. Tubs to cook rock in. And an equal amount of tubs to hold the rock during waterchanges.
3. A few powerheads.
4. Plenty of buckets.
5. A smug feeling of superiority that you are taking it to "the next level."
Here are the steps, if you have any questions I will try my best to answer them. What I don't know I am sure Bomber can/will instruct.
1. Get into your head and accept the fact you will be making lots of salt water if you aren't lucky enough to have access to filtered NSW.
2. Explain to significant other what is going on so they don't flip out. This process can take up to 2 months. Prepare them in advance so he/she can mark it on the calendar and that they won't nag about it until that date arrives.
3. Setup a tub(s) where the rock is to be cooked. Garages are great for this.
4. Make up enough water to fill tub(s) about halfway and around 5-7 buckets about 60% full.
5. Remove all the rock you want to cook at this stage. (The rock can be removed piece by piece until you are done.) I suggest shutting off the circulation beforehand to minimize dust storms.
6. Take the first piece of rock and dunk it, swish it, very, very well in the first bucket. Then do it again in the 2nd bucket, then the third.
7. Place rock in the tub.
8. Repeat steps 6 & 7 to every piece of rock you want to cook at this time. The reason I suggested 5-7 buckets of water will be evident quickly...as the water quickly turnsq brown.
9. Place powerhead(s) in the tub and plug in. Position at least one powerhead so that it agitates the surface of the water pretty well. This is to keep the water oxygenated. You can use an air pump for additional oxygenation if you wish.
9. Cover the tub. Remember, we want total darkness.
10. Empty out buckets, restart circulation on main tank.
11. Wait.
12. During the first couple of weeks it is recommended to do a swishing and dunking of the rocks twice a week.
What this entails is to make up enough water to fill up those buckets and the tub the rock is in.
First, lay out your empty tub(s) and fill buckets the same as before.
Then, uncover tub with the rock in it. Take a rock and swish it in the tub it's in to knock any easy to get off junk.
Then, swish it thru the 3 buckets again, and place in the empty tub..
Repeat for all your rocks.
Then empty the tub that all the rocks were cooking in, take it outside and rinse it out with a hose.
Place tub back where it was, fill with new saltwater, add rocks and powerheads, and cover.
Wait again unti the next water change.
You will be utterly amazed at how much sand, silt, detrius is at the bottom of the tub and every bucket. It is amazing.
How it works:
Some FAQ's.
When re-introducing the rock to my tank, a month or two from now, should I do that in parts to help minimize any cycling effect(s)...if there are any?
I never have. Really after a very short while, the ammonium cycle has been extablished. That's not what you're worry about though, it's the stored phosphates and that you have to wait it out.
When they are producing very little detritus - you'll know - then I would use them all at once.
Would running Carbon filtration and/or a PO4 reducing media help/hurry/hinder the process?
I wouldn't fool with it. You don't want the detritus to sit there long enough to rot, release water soluble P again. You want to take it out while it's still locked up in that bacterial detritus.
I hope this helps you out.
It really is a "miracle" and a low cost one at that.
The only monies spent are for salt and electricity for the powerheads which are nominal. Especially to rid yourself of Bryopsis.
Time and effort is all it akes. And really not that much effort.
I would say that 85% of my exposed rock had Bryopsis (hair algae) covering it.
There isn't a single visible strand on andy rocks in the tubs now.
Remember, the key is patience. Let this process run its course.
And a few last minute tidbits I remembered.
Your coralline will die back, receed etc.
My thoughts on this are GREAT!
Now my rock is more porous for additional pods, mysids, worms etc.
Coralline will grow back.
Throughout this process the sponges, and pods on my rock have not died off.
Everytime I do a waterchange they are there and plentiful.
The first step to this is commitment.
You have to be willing to remove your rock from the tank.
It doesn't have to be all at once, but I feel if you are going to do this do it all. In stages if that is easier but make sure that all of it gets done.
The new environment you are creating for your rock is to take it from an algal driven to a bacterial driven system.
In order to this, the rock needs to be in total darkness to retard and eventually kill the algae's on the rock and to give the bacteria time to do the job.
So basically you need tubs to hold the rock.
Equipment needed.
1. Dedication.
2. Tubs to cook rock in. And an equal amount of tubs to hold the rock during waterchanges.
3. A few powerheads.
4. Plenty of buckets.
5. A smug feeling of superiority that you are taking it to "the next level."
Here are the steps, if you have any questions I will try my best to answer them. What I don't know I am sure Bomber can/will instruct.
1. Get into your head and accept the fact you will be making lots of salt water if you aren't lucky enough to have access to filtered NSW.
2. Explain to significant other what is going on so they don't flip out. This process can take up to 2 months. Prepare them in advance so he/she can mark it on the calendar and that they won't nag about it until that date arrives.
3. Setup a tub(s) where the rock is to be cooked. Garages are great for this.
4. Make up enough water to fill tub(s) about halfway and around 5-7 buckets about 60% full.
5. Remove all the rock you want to cook at this stage. (The rock can be removed piece by piece until you are done.) I suggest shutting off the circulation beforehand to minimize dust storms.
6. Take the first piece of rock and dunk it, swish it, very, very well in the first bucket. Then do it again in the 2nd bucket, then the third.
7. Place rock in the tub.
8. Repeat steps 6 & 7 to every piece of rock you want to cook at this time. The reason I suggested 5-7 buckets of water will be evident quickly...as the water quickly turnsq brown.
9. Place powerhead(s) in the tub and plug in. Position at least one powerhead so that it agitates the surface of the water pretty well. This is to keep the water oxygenated. You can use an air pump for additional oxygenation if you wish.
9. Cover the tub. Remember, we want total darkness.
10. Empty out buckets, restart circulation on main tank.
11. Wait.
12. During the first couple of weeks it is recommended to do a swishing and dunking of the rocks twice a week.
What this entails is to make up enough water to fill up those buckets and the tub the rock is in.
First, lay out your empty tub(s) and fill buckets the same as before.
Then, uncover tub with the rock in it. Take a rock and swish it in the tub it's in to knock any easy to get off junk.
Then, swish it thru the 3 buckets again, and place in the empty tub..
Repeat for all your rocks.
Then empty the tub that all the rocks were cooking in, take it outside and rinse it out with a hose.
Place tub back where it was, fill with new saltwater, add rocks and powerheads, and cover.
Wait again unti the next water change.
You will be utterly amazed at how much sand, silt, detrius is at the bottom of the tub and every bucket. It is amazing.
How it works:
Some FAQ's.
When re-introducing the rock to my tank, a month or two from now, should I do that in parts to help minimize any cycling effect(s)...if there are any?
I never have. Really after a very short while, the ammonium cycle has been extablished. That's not what you're worry about though, it's the stored phosphates and that you have to wait it out.
When they are producing very little detritus - you'll know - then I would use them all at once.
Would running Carbon filtration and/or a PO4 reducing media help/hurry/hinder the process?
I wouldn't fool with it. You don't want the detritus to sit there long enough to rot, release water soluble P again. You want to take it out while it's still locked up in that bacterial detritus.
I hope this helps you out.
It really is a "miracle" and a low cost one at that.
The only monies spent are for salt and electricity for the powerheads which are nominal. Especially to rid yourself of Bryopsis.
Time and effort is all it akes. And really not that much effort.
I would say that 85% of my exposed rock had Bryopsis (hair algae) covering it.
There isn't a single visible strand on andy rocks in the tubs now.
Remember, the key is patience. Let this process run its course.
And a few last minute tidbits I remembered.
Your coralline will die back, receed etc.
My thoughts on this are GREAT!
Now my rock is more porous for additional pods, mysids, worms etc.
Coralline will grow back.
Throughout this process the sponges, and pods on my rock have not died off.
Everytime I do a waterchange they are there and plentiful.
UTR Reefer.... doesn't that seam a bit excessive? Its a new tank so it will be cycling regardless.
So far I have soaked the rock overnight in water and scrubbed with a brush. What in the world could possibly be lingering that would requiring "cooking" the rock? Remember, this rock as been sitting in a rubbermaid without water for about 6 years.
So far I have soaked the rock overnight in water and scrubbed with a brush. What in the world could possibly be lingering that would requiring "cooking" the rock? Remember, this rock as been sitting in a rubbermaid without water for about 6 years.
If your rocks are saturated with phosphates then this is the way to go. It essentially allows the bacteria to flush the pores of the rock from the inside out, removing ALL the embedded nutrients, detritus and trapped phosphate. This is why soo much stuff comes out of the rock for weeks.
So is it Excessive? maybe. But one day you'll get Hair Algae so bad that this will seem like a stroll through the park.
So is it Excessive? maybe. But one day you'll get Hair Algae so bad that this will seem like a stroll through the park.
Greybeard
New member
I always chuckle at this sort of thing... That rock may be hundreds of thousands of years old, as is the 'brand new' stuff most of us purchase. Even if you use concrete to make your own rock, you're making it out of materials that may be a half a billion years old.
A good soak in a strong bleach mixture, then let it dry (thoroughly) in the sun. will get rid of most organic matter.
A good soak in a strong bleach mixture, then let it dry (thoroughly) in the sun. will get rid of most organic matter.
billdogg
Well-known member
I prefer to grill my rocks to a nice medium rare.
Oh wait - that would be grill my steaks.....
I couldn't agree more with the need for a change of terminology.
And FWIW - a good portion of the rocks I used for my current 120g DT are rocks that had been sitting dry for nearly 15 years - first in the backyard, then in boxes in the basement. I looked at them, didn't see anything to worry about, rinsed them in the slop sink and plopped them into the tank.
