Voltage Alams

[swoods140]

Is it possible to use voltage as a condition in programming?
My electric company changed my meter to a smart meter today and when the power came back on my AI's went to 100%.

 

[swearint]

No, it is my understanding from Curt that there is no feedback of the voltage on the VS ports. I had asked hoping that he could telnet into my Apex and confirm that the VS ports were not operating correctly. If it becomes a recurring problem, you could use the 'If Power...' command to shutdown the ports for a specified duration and send an email. That would give you the opportunity to check on it.

Todd

 

[swoods140]

I haven't upgraded to the VDM and controlling the units on the AI controller but have them plugged in to an EB4 to monitor amperage which is how I caught the problem on my IPhone at work. Can you use amps to program in this manor...If amps>2 then off?

 

[swearint]

I haven't upgraded to the VDM and controlling the units on the AI controller but have them plugged in to an EB4 to monitor amperage which is how I caught the problem on my IPhone at work. Can you use amps to program in this manor...If amps>2 then off?

Not currently, but I believe that it is on the list of future upgrades.

Todd