wanted mega flow kit

[waymack97]

anybody have a mega flow kit for a 180 for sale. or a diy design?

 

[jbrunken]

I built my own for my new 125...

All the info you need is here:

http://www.dursostandpipes.com/

You might have to order the bulkheads online, but everything else should be available locally.

-JB

 

[got2lb]

Yep you can build them for about $5

 

[waymack97]

wow thanks. to lowes i go.

 

[llebcire]

<a href=showthread.php?s=&postid=9439621#post9439621 target=_blank>Originally posted</a> by waymack97
wow thanks. to lowes i go.

This is all from Lowes and was about $5 (+/-). I used the existing bulkhead which should work for you as well, but of course you'll need to double everything for a 180.

I went to dursotandpipes-->build your own standpipe, printed, and took it to Lowes.

Very easy and it only took me about 15 minutes to build the standpipe.

FYI- In going for the smallest hole in the endcap, I did find that it worked for about a week then must have experienced some salt creep as the level dropped. I went to the next size drill bit and it's been fine for a month.

Good luck! Amazing how quite this thing is!

Don't mind the notes on the pics- quickly photoshopped and sent to someone that watched my tank for a week in February.

 

[waymack97]

ok. so the 1 inch holes are for the durso. so the 3/4 inch holes are the return. i have 4 holes 2 are 1 inch and 2 are 3/4 inch.