Water change automation

E

eredder

New member
Hello:

I am relativity new to the hobby, about two years in. I am getting tired of water changes and would like to automate them, if it is not cost prohibitive. I currently have a 90g mixed reef with a sump in the basement. I change 15g a week. I am using an Avast Marine Barrel tender to make RO but I am not sure how to make the leap to water change automation. Any assistance would be great. Please let me know if more detail is needed. Thank you!
 
I'm in the process of setting this up myself. You could do it the expensive and cooler way by using an apex to program an apex doser pump to flush out tank water and input fresh water at small increments how ever many times a day you set it to.

Or

You can use two of these pumps to do the same thing but you'll have to have them plugged in to a typical outlet timer you can get at Home Depot for $5.
25f237512984d5d9b5a5fed35269acf1.jpg



Sent from my iPhone using Tapatalk
 
eredder said:
I am getting tired of water changes and would like to automate them, if it is not cost prohibitive...I change 15g a week...
Click to expand...

What part of the 15 gallons a week is the most tedious?

I'd start there. Moving the water? to the drain, or returning make-up water to the tank?

A lot of tanks have manual water changes that require turning a couple of valves - shouldn't take but a few minutes - that you need to take to check the gear in the basement anyway, right? Make it simpler first is my suggestion.

HTH
 
thearsalan1 said:
I'm in the process of setting this up myself. You could do it the expensive and cooler way by using an apex to program an apex doser pump to flush out tank water and input fresh water at small increments how ever many times a day you set it to.

Or

You can use two of these pumps to do the same thing but you'll have to have them plugged in to a typical outlet timer you can get at Home Depot for $5.
25f237512984d5d9b5a5fed35269acf1.jpg



Sent from my iPhone using Tapatalk
Click to expand...



Thanks! I have heard of people using the Apex Dos for water changes. I didn't think about using aqualifters.

How are you planning to handle the waste water and new saltwater? Do you have drums, buckets, right down the drain?
 
on the spot said:
What part of the 15 gallons a week is the most tedious?

I'd start there. Moving the water? to the drain, or returning make-up water to the tank?

A lot of tanks have manual water changes that require turning a couple of valves - shouldn't take but a few minutes - that you need to take to check the gear in the basement anyway, right? Make it simpler first is my suggestion.

HTH
Click to expand...



Thanks for the reply. I wouldn't mind turning a couple of valves. I do check on the equipment. I think the part I would like to simplify would be the draining and mixing. Getting the new water into the system is the easiest part for me.


Sent from my iPhone using Tapatalk
 
That's where it can get a little tricky. Having salt drain into your sewer pipes constantly for years is not a good idea. My sump is luckily next to a bulkhead on the side of my house, so I plan to dig a hole in the ground and fill it with gravel (French drain system), and pull a line through the wall into that pit for old water to drain into. For new saltwater I'll be using a 55g food grade drum and I'll also have one for fresh water for ATO.

I also didn't mention, I'm going the apex route since I have one with all sorts of fail safes and redundant measures as I travel for work and it's kind of a necessity and peace of mind for me. If you can avoid all that, the cheap way will work just as well, just have to keep an eye on it way more often.


Sent from my iPhone using Tapatalk
 
What is the problem to drain old salt water into sewer pipes?

Draining into a pit dug at the side of your house would end up tins of salt right tgete over tome, right?

I use a Cole Parmer masterflex dual head peristaltic pump to do my water change, set at 4ml/min, 24x7.

thearsalan1 said:
That's where it can get a little tricky. Having salt drain into your sewer pipes constantly for years is not a good idea. My sump is luckily next to a bulkhead on the side of my house, so I plan to dig a hole in the ground and fill it with gravel (French drain system), and pull a line through the wall into that pit for old water to drain into.
Sent from my iPhone using Tapatalk
Click to expand...






Sent from my iPhone using Tapatalk
 
Draining saltwater into the sewer is better than into the ground next to your house.


Sent from my iPhone using Tapatalk Pro
 
scuzy said:
Draining saltwater into the sewer is better than into the ground next to your house.


Sent from my iPhone using Tapatalk Pro
Click to expand...



I disagree, saltwater is one of best ways to speed up corrosion in the sewer plumbing in your house. By sewer, I mean the metal piping within the foundation or where ever else. It'll obv be fine in PVC since that's what we use in our systems.

Just think of what salt does to cars in the northeast..

Of course the hole in the ground won't be close to my house, and I definitely don't plan to grow any trees over that area.


Sent from my iPhone using Tapatalk
 
All the pipings here are abs I don't think there's any metal pipes use in our homes here at least not in California.


Sent from my iPhone using Tapatalk Pro
 
That makes sense, that was another thing I meant to mention, it also depends on the plumbing/how old your house is. Good point, you'll definitely be fine in your case as you already know.


Sent from my iPhone using Tapatalk
 
You will kill your septic tank fauna if you have your own system. Public sewer, I would dump it down the drain. I spread my saltwater on my drive way (gravel) helps melt the snow and ice in winter.

What is the item you posted in the photo. I'm also interested in this idea!
 
reef cuber said:
You will kill your septic tank fauna if you have your own system. Public sewer, I would dump it down the drain. I spread my saltwater on my drive way (gravel) helps melt the snow and ice in winter.

What is the item you posted in the photo. I'm also interested in this idea!
Click to expand...



It's an aqua lifter pump that pulls water from one tube and spits it out the other. Pretty inexpensive and very universal. It's also very good for doing a diy ATO, all you do is splice a float sensor (also very cheap) into one side of the power wire and you're good to go.


Sent from my iPhone using Tapatalk
 
reef cuber said:
You will kill your septic tank fauna if you have your own system. Public sewer, I would dump it down the drain. I spread my saltwater on my drive way (gravel) helps melt the snow and ice in winter.

What is the item you posted in the photo. I'm also interested in this idea!
Click to expand...



My plan was just to put it down the drain. I am not on septic. I did not know that saltwater would kill septic bacteria. Thanks!


Sent from my iPhone using Tapatalk
 
I'd love to have automatic water changes. I don't know what it is, but it's just so annoying haha. When my tank was at my parents' house, I had to do the ol' carry buckets method. Needless to say, water changes were rare. Now, my sump is within 6 foot of a utility sink and I have enough space for a large brute trash can. I fill that with water, which nets about 30g when full, mix and heat in the trash can. And then when I'm ready, I turn my return off and the amount that ends up in the sump is equal to the amount in the brute can. I plumbed some PVC pipes to the utility sink. To drain the sump, all I do is push some vinyl tubing onto a barbed fitting and plug the pump in. I'd say it's as easy as it could be without doing automatic.
 
I have the AutoAqua and LOVE IT!! I do 2 gallon water changes every day. All I have to do is turn off my ATO and press a few buttons. Best investment I have made for my reef in a long time! Love it!
 
To make it more interesting, I'm looking into automating the mixing of the new saltwater as well. Haven't really researched if this functionality comes prebuilt in a kit, but I'm looking into doing it myself with the use of a raspberry pi and some mechanism to pour the salt in the saltwater barrel and another ATO in the saltwater barrel once the level gets too low. Once this is accomplished, the only thing I'll need to make sure of is that there is salt constantly available in the supply container. I'd love to hear ideas of someone already has this or has seen.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Similar threads

M
Back to this wonderfull hobbie after 10 years
Replies
4
Views
178
griss
griss
R
School Project for Reef Biological Filtration
2 3
Replies
46
Views
1K
Reef-Explorer
R
jbraslins
Automated RODI/Salt mixing station with 2 50 gal reservoirs in uninsulated garage?
Replies
7
Views
990
griss
griss
F
Any pointers for moving a large and heavy tank into the basement?
Replies
16
Views
402
Puggz
P
G
Best of the Best
Replies
7
Views
863
wvned
wvned
Back
Top