Wavebox 6215 PSU Jumpers

[andyos]

Hi Roger, I bought a used 6215 Wavebox (it was actually a 6212 that had a faulty pump replaced with the 6215) and the psu only has one jumper - 18V, is this correct or can it be run at other voltages? If so, how do I get the additional jumpers?

Second question, in a tank with two 6095's & the 6215 if you could only have one on battery backup which would you choose, a 6095 or the wavebox? Regards, Andy

 

[rvitko]

Check which power supply you have, either 6101.240 or 6105.240, the jumper will be either 6101.242 or 6105.242 and you can order it on Tunze.com.

I would run the 6095, it uses less power so it can either run longer or a smaller battery can be used, even a 12V disposable lantern battery can run the 6095 for 2-3 hours.

 

[andyos]

Hi Roger, it's a 6105.240 and as I looked in the box, I saw the 24v jumper lying in the bottom Thanks for the quick response, Andy