Which controller?
- Thread starter luv4paws2
- Start date
shawnz28
New member
Yes the 7095 can do what you are looking for. Interval 1 or Interval 2 should work depending on if you want one pump to be fully off while the other is on or not. check out page 15-37 of the manual (remember each page is written in 3 languages so sounds like more than there is)
http://www.tunze.com/fileadmin/gebrauchsanleitungen/x7095.8888.pdf
http://www.tunze.com/fileadmin/gebrauchsanleitungen/x7095.8888.pdf
shawnz28
New member
Yes the 7095 can do what you are looking for. Interval 1 or Interval 2 should work depending on if you want one pump to be fully off while the other is on or not. check out page 15-37 of the manual (remember each page is written in 3 languages so sounds like more than there is)
http://www.tunze.com/fileadmin/gebrauchsanleitungen/x7095.8888.pdf
http://www.tunze.com/fileadmin/gebrauchsanleitungen/x7095.8888.pdf
shawnz28
New member
I believe most if not all things the 7095 can do including pulsing can be done on the 7096 but I will let Roger attest to that being a fact or not. It is planned for March release last I checked. Depending on what you plan to keep I think the 6105s might be a better or wise choice as the max flow is much higher
shawnz28
New member
this below is from a post from Mid Dec by Roger
The 7096 has just about every feature of the 7095, the only feature lost is the Interval can only be as fast as 1min, on the 7095 1sec is possible. This was a compromise to keep the interface simple. Added features are below:
Moonlight is now 3* more candella, for all practical purposes it appears twice as bright.
"Storm Mode" has been added, every 1-7 days (user setting) the main program is overridden and the pumps all run in a random chaos mode for about an hour to clean up debris.
Food timer duration is programmable.
"Wavebox mode" with auto tuning. 2 channels can run a wavebox and there is a seek feature where it just slowly advances the timing and you hit stop once a wave is created.
The controller is pretty much ready, the only bug we have to work out is with Windows, right now it has trouble with the COM ports and this must be manually assigned 80% of the time, this has to be solved.
The 7096 has just about every feature of the 7095, the only feature lost is the Interval can only be as fast as 1min, on the 7095 1sec is possible. This was a compromise to keep the interface simple. Added features are below:
Moonlight is now 3* more candella, for all practical purposes it appears twice as bright.
"Storm Mode" has been added, every 1-7 days (user setting) the main program is overridden and the pumps all run in a random chaos mode for about an hour to clean up debris.
Food timer duration is programmable.
"Wavebox mode" with auto tuning. 2 channels can run a wavebox and there is a seek feature where it just slowly advances the timing and you hit stop once a wave is created.
The controller is pretty much ready, the only bug we have to work out is with Windows, right now it has trouble with the COM ports and this must be manually assigned 80% of the time, this has to be solved.
