WXM & mp40 Attach fail. Need advice please.

[iSeeMax101]

Setting up Apex Classic for the first time. Please forgive me if this is supposed to be a simple solution.

I have 2 wireless MP40's (not sure if it matters but, the units are Black). I was able to connect one of the pumps (the master with W) but I have been unsuccessful at connecting the other. I'm wondering if it also needs to have a W at the top right hand corner?

I have followed proper procedures multiple times on the last pump and nothing is coming up in Fusion for the slave pump.

All modules are updated. Still unable to detect.

Am I missing something?

https://www.neptunesystems.com/getstarted/wxm/vortech/

 

[ontop27]

Im confused are you sayings its not wireless or that its a slave? Did you do the reset first to break the master slave combo? (Assuming its wireless)

Sent from my SM-G950U using Tapatalk

 

[THEUNION1]

Connection. He means they aren’t connecting.

 

[ontop27]

He said without the w though. Pretty sure if the w isnt lighting up then its not wireless. (At least in my experience) i have the xwm and two wireless mp10s and

Sent from my SM-G950U using Tapatalk

 

[iSeeMax101]

Both units have a W at the top right hand corner. Only the one with the W that’s yellow is connecting. The other unit also has a W but light is not on. I was told that the one with the lit up W would be the master. I’m guessing ontop27 is correct. Maybe I need to disconnect the master slave combo. I’ve cleared the memory on the pump but that didn’t light up the W. Any other possible suggestions? I will look into splitting the combo now

 

[fenass]

I had the same issue with my MP10's "œblack box" and I realized that the one was wireless and the second one was "œwireless capable" so I had to buy the "œRF Module" and I have now both connected.
I hope it can help you


Sent from my iPhone using Tapatalk

 

[iSeeMax101]

So I decided to just open up the unit and see if there was anything that might be wrong inside. I’m not what you would call extremely text savvy. But it wasn’t hard to tell that one of the chipsets was not fully seated LOL looks like I just figured out the problem

 

[iSeeMax101]

Both W are on each unit now

 

[frogiii]

Both W are on each unit now

all comes with that W on the unit but only the wireless unit has the module which turns that W on.

Good job opening that up and reconnected. How did that come undone?? lol. did you smash it??