Reggae Fish
Premium Member
Well after numerous suggestions to go ahead and do a tank build thread, here it is. All equipment is purchased and stand/canopy is on it's way and will be staining and then stealing a couple people to help with my lights (thanks roy/mark). Going to have 2- 20 Amp GFCI Breakers installed solely for the tank (thanks steve).
Here's pics of the stand/canopy and a list of equipment I plan on using. Please let me know if you have any suggestions. For all the people out there that have helped me, thanks! I would have put a bat through my tank already had I not had all the help!
Thanks,
Justin
2- Lumenarc III Mini Reflectors
Hamilton 250W 14 Single Ended Bulbs
Sunlight Supply BlueWave 7 Dual Ballast HQI
IceCap Temp Sensing 4" Fans
ICECAP 660 VHO Retro Kit with 4- 50/50 Actinic (46â€Â)
EuroReef RS-180 with Gate Valve Mod (GenX 4100)
AC Jr. with PH probe with DC8
45 Gallon Sump/Fuge
Finnex PC Lights for Fuge
Mag-12 for Return
2- Tunze 6000’s with Suregrip Magnets
160 LBS. CaribSea Seaflor Special Grade Sand
110 LBS. of Kalieni, Univa, and MI
Auto Top Off unit
JBJ Digital Mag-Float
On the stand I had 2 trap doors made on the floor area so should I have a leak, I can pull the one on the opposite side of my sump to clean and run a fan since I have wood floors. I also had a shelf built on the top inside for my ballast to get it out of the way. In addition, I got it made without the brace running top to bottom on the front to make it easier to work on the inside and doors on each end. There is also routed holes in the sides of the canopy for extra cooling even though it's got an open back.
Sorry for so many pics!
Here's pics of the stand/canopy and a list of equipment I plan on using. Please let me know if you have any suggestions. For all the people out there that have helped me, thanks! I would have put a bat through my tank already had I not had all the help!
Thanks,
Justin
2- Lumenarc III Mini Reflectors
Hamilton 250W 14 Single Ended Bulbs
Sunlight Supply BlueWave 7 Dual Ballast HQI
IceCap Temp Sensing 4" Fans
ICECAP 660 VHO Retro Kit with 4- 50/50 Actinic (46â€Â)
EuroReef RS-180 with Gate Valve Mod (GenX 4100)
AC Jr. with PH probe with DC8
45 Gallon Sump/Fuge
Finnex PC Lights for Fuge
Mag-12 for Return
2- Tunze 6000’s with Suregrip Magnets
160 LBS. CaribSea Seaflor Special Grade Sand
110 LBS. of Kalieni, Univa, and MI
Auto Top Off unit
JBJ Digital Mag-Float
On the stand I had 2 trap doors made on the floor area so should I have a leak, I can pull the one on the opposite side of my sump to clean and run a fan since I have wood floors. I also had a shelf built on the top inside for my ballast to get it out of the way. In addition, I got it made without the brace running top to bottom on the front to make it easier to work on the inside and doors on each end. There is also routed holes in the sides of the canopy for extra cooling even though it's got an open back.
Sorry for so many pics!