150g Acrylic Tank, w/ Stand & Canopy (Naples/Fort Myers, FL) - $1,000

[wiszmaster]

FS is a 150g Acrylic Tank with rounded front corners.

TANK DOES NOT LEAK !!!

TANK IS NOT DRILLED FOR CLS !!!

60" x 24" x 24"

Thickness 3/8"


Tank has single center overflow box, blue backwall & overflow box. Will come with 4 month old bulkheads & seals. Durso Standpipe, and flex return pipe (as visible in below pictures)

Tank has 2 tops, with 3" fans built in.

Canopy has 4 x 3" fans built into top - 2 on the left top, 2 on the right top.
Stand has 2 large doors w/ Starfish knobs/handles.



Pics below are from between 4 months ago - till a few weeks ago. I tore the tank down throughout the last week, and will clean it, buff any and all scratches out.

Front pic of stand & tank. Cutouts for tops visible.

Rounded corners

Up & Running

Canopy w/ holes for fans (before 4th hole was drilled & trimmed)

shot of tank tops w/ fans & leds

Tank, Stand & Canopy shot:

Location: South West Florida - Fort Myers, Near Naples

Price $1,000


This tank is NOT very heavy. I believe the stand is heavier than the tank.

 

[lifesworksataol]

wow what a nice tank! = what a great buy

 

[1slapnuts]

What kind of lighting system comes with the setup? Also what does not drilled for CLS mean?

 

[cstires]

CLS is short for Closed Loop System.

 

[ricanboy57]

nice tank, why the tear down? (CLS = closed loop system.)

 

[wiszmaster]

<a href=showthread.php?s=&postid=9281522#post9281522 target=_blank>Originally posted</a> by 1slapnuts
What kind of lighting system comes with the setup?

There are NO lights included with that price, but something could be worked out to include the T5's that are currently in the canopy as pictured.

6 x 60" 80w T5 bulbs, on 2 x IC660 Ballasts (3 bulbs each)
6 x 60" SLRs
I also have 2 x 48" 54w T5 bulbs on a standard ballast that i have not yet installed.
2 x 48" SLRs
If the price is right, i don't mind selling the canopy as is, including lights & all prewired... and if you wanted, i'll even install & wire up the remaining 2 lights for you.

<a href=showthread.php?s=&postid=9281522#post9281522 target=_blank>Originally posted</a> by 1slapnuts
what does not drilled for CLS mean?

This tank is NOT drilled for a Closed Loop System. It has NO holes other than the 2 in the overflow box for the drain & return.
Since it is acrylic is could easily be drilled for a Closed Loop System.

I have a truck, and could probably get a trailor - we could meet 1/2 way, or if you don't mind paying for gas, i'll bring it up to Orlando.

--marco

 

[wiszmaster]

<a href=showthread.php?s=&postid=9282019#post9282019 target=_blank>Originally posted</a> by ricanboy57
nice tank, why the tear down?

Thank You!
Hopefully upgrading to a larger one.... all dependent on selling this one... if i cannot sell this one, i will be setting this one up again.
I had a really bad hydroid issue, throughout the last week we took out the rock & cooked it. I figured since the tank is down anyway ... i'd upgrade if I can sell this tank.

I had purchased this tank last year, and then moved shortly after buying it - int he new house we have MUCH larger area to work with.

 

[Don Lino]

Anyone interested in purchasing this stand and canopy, please LMK. I am very interested in purchasing the tank, so we can get together and work something out, Thanks.

Marco- Good Luck either way....Thanks

 

[wiszmaster]

a few people asked for dimentions .. figured i'd post them in here as well

Stand:
TALL: 30" 3/4"0
LONG: 63"
DEEP: 26"

Tank sits @ 30" 1/4" (Bottom 1/2" of tank is covered by trim)


Tank:
TALL: 24" 1/8"
LONG: 60" 1/4"
DEEP: 24" 1/4"

Canopy:
TALL: 7"
LONG: 63"
DEEP: 26" 1/2"
Covers TOP 1" 3/4" of Tank

Total HEIGHT of Stand, Tank & Canopy

30.25 (Stand)
+24.125
+ 5.25
======
59" 3/4" from FLOOR to TOP of canopy.

 

[wiszmaster]

BUMP!

 

[wiszmaster]

SOLD

Thank You Kyle!