2 6080's on a 7091?

[fishyface]

do you think this work well enough on my 120g? also, what exactly can i do with the controller? is is for alternating between pumps, can it throttle down pumps to change GPH?

any other combo's you could recommend instead? i want decent flow...

thanks

 

[E-A-G-L-E-S]

6080's and 6060's are not controllable.
6000's and 6100's are.

 

[fishyface]

crumby, wave box is probably the best option then, looking for good chaotic flow. also, can that live in a corner?

 

[rvitko]

The wavebox can be placed in the corner if a tank is less than 2ft wide. Usually additional flow is required with the wavebox. My advice is one 6000 a single controller and a wavebox or 2 6000 and a 7095.

 

[fishyface]

ok, got another question then, what tunzes will work with an Neptune Acjr controller?

 

[rvitko]

Any of them but you must allow 1hr between off and on cycles. 15minutes on the nano Streams.

 

[fishyface]

<a href=showthread.php?s=&postid=9574726#post9574726 target=_blank>Originally posted</a> by rvitko
Any of them but you must allow 1hr between off and on cycles. 15minutes on the nano Streams.

thanks Roger, i was told by a lfs that i couldn't run a few 6080's which was what i was hoping to do. do you think 2 of these on acjr for 120g would be a good choice? or 2 6060's? i had a single vortech but decided to give the tunze's a try instead...

 

[rvitko]

For SPS and coarse sand or bare bottom 2 6080's otherwise 2 6060's would be fine with the 1 hr interval, I would do it such that the pumps off and on times overlap by 10-15 minutes to create a surge.

 

[fishyface]

<a href=showthread.php?s=&postid=9575009#post9575009 target=_blank>Originally posted</a> by rvitko
For SPS and coarse sand or bare bottom 2 6080's otherwise 2 6060's would be fine with the 1 hr interval, I would do it such that the pumps off and on times overlap by 10-15 minutes to create a surge.

great idea!! appreciate the advice!