(2) XR15W Pro lights, not same intensity

[InADream]

I have (2) XR15W Pro lights over the tank, and when the ramp down, the two lights are not the same intensity. According to the the schedule they are exactly the same, but when the light is at 10% intensity the one on the left is brighter.

It is very hard to tell if they are doing the same thing at higher intensity.

I tried calibrating the lights, but unsure if I am doing it correctly. As far as I know they are calibrated.

Thanks,

 

[davehead86]

I would try a couple things ...

1. Are they both on the same firmware update?
2. Factory reset and redownload of the schedule.
3. Maybe Ecotech can provide some insight, have you emailed them?

 

[InADream]

Thanks for the reply,

I haven't emailed them yet, figured I would check here first and see what everyone said.

I will try and factory reset and make sure everything is up to date.

Thank you,

 

[Alex Y EcoTech]

Inadream,

I would recommend performing a calibration on your Radions by following the steps below:

1. Power down all Radions for 30 seconds
2. Connect via USB to a single Radion and start the Connection Manager (If not using a ReefLink)
3. Open EcoSmart Live using either Google Chrome or Safari as your internet browser.
4. Select the "Devices" tab at the top of the screen
5. Select the 'Gear" icon next to Light 1
6. Select "Calibrate" and carefully perform the steps in a dark room
7. Repeat steps 5 & 6 for each Radion
8. Select the "Done" button to save changes
9. Finally select the "Program Aquarium"