200g oceanic setup, for sale again!

jamal-188

In Memoriam
For sale again :)

Selling my 200g Oceanic Reef Ready setup. It was running less than 6 months and is in great condition. Everything that is in the picture is included, I'll do my best to explain everything. There are no scratches, chips etc as far as I can tell in the main tank. It measures 84x24x25. The tank has one overflow in the back right corner but it was custom made with a large 2.5" hole in the overlow as a drain. The back of the tank is drilled twice and plumbed up as returns. A 75g oceanic sump is included that is drilled in the bottom left corner and plumbed up to the return pump(4MDQSXC) I figured it was doing about 1100gph return at that head pressure. From the 75g sump a smaller pump pushes water into the 56g fuge. Water goes aroudn teh divider and drains back into the sump via two drilled holes in the side. There are 2x65w PC bulbs above the fuge for macro growth. Stand and canopy are homemade. They are decent looking but I'm sure you would want to finish/enclose the bottom of the tank if you wanted to put it in your living room. This setup worked extremly well keeping various SPS, LPS, Clams, Softies, Fish etc... but my fiancee and I purchased a house and this tank will not fit. I have about 100lbs of base rock I will include with the setup and another 12lbs of rubble rock. The picture is not very good, hard to get a picture in my dark basement. Tank is in perfect condition!!

Please check out the pictures below, I tired to draw how the setup operates but don't be afraid to ask questions I"m asking $950 for everything(the tank itself was that much and It's basically brand new). I also have several salt buckets of sand that you are welcome to take with you.

tankdrawing.jpg



tank.jpg
 
Jamal,

Where are you located and how is the top of the tank braced? I looked at another oceanic 210/220 and it had a 20" wide glass cross brace in the center, making it hard to light.

Thanks!

Adam
 
I'm located in denver pa 17517. The top is braced with a piece of glass. I used a 400w halide in the center and didn't have any issues as long as I kept it clean and free of salt creep.
 
Back
Top