250 Gallon reboot

Ahhh interested to see it setup and getting feedback from you when you get it running.
 
worm5406 so far I have the reactor filled and it's been pretty straight forward to setup and dial in, I will know more once I get some coral added to the tank how much it will keep up with the demand. I am having Avast Marine make me an effluent chamber just to buffer.
 
Ahh. I really liked the updated pictures and video!!! You should post them in here for others.
 
Yeah, I am going to finally be free this weekend, as most things are done with the tank, I will update most of the photos...hope folks bring their high-speed internet as there will be tons of photos....
 
Some picture of the stand I built..more to come.. :)
 

Attachments

  • 20151025_151449.jpg
    20151025_151449.jpg
    33.2 KB · Views: 0
  • 20151025_151509.jpg
    20151025_151509.jpg
    35.8 KB · Views: 0
  • 20151025_153405.jpg
    20151025_153405.jpg
    50.2 KB · Views: 0
  • 20151025_173258.jpg
    20151025_173258.jpg
    51.3 KB · Views: 1
  • 20151027_200539.jpg
    20151027_200539.jpg
    46.4 KB · Views: 0
Stand continued...
 

Attachments

  • 20151027_200548.jpg
    20151027_200548.jpg
    41.4 KB · Views: 0
  • 20160109_130008.jpg
    20160109_130008.jpg
    57.6 KB · Views: 0
  • 20160206_151449.jpg
    20160206_151449.jpg
    43.9 KB · Views: 0
  • 20160206_151505.jpg
    20160206_151505.jpg
    44.6 KB · Views: 0
  • 20160228_142623.jpg
    20160228_142623.jpg
    43.4 KB · Views: 0
Stand completed and tank mounted...Had a bit of sap make it through that explains the discoloration on the front panels. I should have ponied up more money for wood and finished it in walnut...
 

Attachments

  • 20160511_133549.jpg
    20160511_133549.jpg
    42.8 KB · Views: 0
  • 20160514_152702.jpg
    20160514_152702.jpg
    68.3 KB · Views: 0
  • 20160521_175331.jpg
    20160521_175331.jpg
    50.1 KB · Views: 0
Last edited:
200lbs of CaribSea Seaflor Special Grade Reef Sand, which gave me a 2in sand bed to work with. I have always run a semi-deep bed in all my tanks which give my sifting animals a place to hide and scavenge for food. Then I have about 100lbs of what was my live rock, which is now base rock as it's been dried for three years.
 

Attachments

  • 20161222_094531.jpg
    20161222_094531.jpg
    74.8 KB · Views: 0
  • 20161222_094606.jpg
    20161222_094606.jpg
    57 KB · Views: 0
  • 20161222_105159.jpg
    20161222_105159.jpg
    56.9 KB · Views: 0
Foundation jacks have been installed to prevent the floor joist from slumping.
 

Attachments

  • 20161223_114832.jpg
    20161223_114832.jpg
    58.8 KB · Views: 0
A few pieces of equipment.
 

Attachments

  • 20161229_125013.jpg
    20161229_125013.jpg
    40.1 KB · Views: 0
  • 20170116_145124.jpg
    20170116_145124.jpg
    40.1 KB · Views: 0
  • 20170116_145356.jpg
    20170116_145356.jpg
    39.1 KB · Views: 0
  • 20170116_150143.jpg
    20170116_150143.jpg
    44.7 KB · Views: 0
  • 20170116_150545.jpg
    20170116_150545.jpg
    40.7 KB · Views: 0
vikinglord13 my home is on a sloped lot, which gives me a partial basement, this was one thing on the list is a basement space to set up a fish room.
 
Here are a couple quick shots of equipment in the basement.
 

Attachments

  • 20170127_105153.jpg
    20170127_105153.jpg
    43.8 KB · Views: 0
  • 20170127_105509.jpg
    20170127_105509.jpg
    57.7 KB · Views: 0
  • 20170127_105521.jpg
    20170127_105521.jpg
    49.8 KB · Views: 0
  • 20170127_105537.jpg
    20170127_105537.jpg
    65.5 KB · Views: 0
How do you like the calcium reactor? Looking at grabbing the same for my 300g...any issues or regrets? Thanks
 
Dapg8gt the reactor is well built and pretty simple setup, I like fact that the effuent is controlled on the intake of the reactor which should prevent clogging, there is also a sediment filter on the intake to keep detritus out. I do have to admit that the reactor should be dead level to make sure that all the air bubbles are vented. I had mine on a wire shelf and had to put a piece of plywood underneath. The unit took four days total to setup, first day plumbing and filling with media, second day running it wide open to let the dust purge from the media, this is even after an initial rinse, then the last two days to find a drip rate which maintained the calcium and ALK....Two days of small adjustments ��. No regrets in regards to the reactor, I would purchase it again.
 
Last edited:
Dapg8gt also getting the aquamaxx allowed for room in the budget to purchase the carbon doser which is an awesome regulator set it and forget it. The bubble count will not change.
 
Back
Top