2nd PH probe

[cobra1858]

I was using a ORP probe, but want to change it to a 2nd PH probe. In the PH setup section of the controller there was a PH2 on/off setting which is now gone. Even after setting the ORP to off the PH2 setting did not return. I did an init memory and still no luck. Any ideas on how to get it back?

 

[clp]

I just looked in the 3.00J 2A06 release, and the second pH probe enable is indeed there. What version of the firmware are you using?

Curt

 

[cobra1858]

Hi Curt,

It is an AC3 PRO running 3.0 date code 2/1/06. It used to have the PH2 setting. I'm not sure when it went away.

 

[clp]

The 3Pro does not support a second pH probe.

Curt

 

[jnfallon]

bummer. thaats what i have

 

[reefkeeps]

What version has it?

 

[reefkeeps]

bump

 

[h20cooled]

ACIII supports a 2nd pH probe...

 

[revnull]

Will there be a firmware update to allow the AC3Pro to use the ORP port as a 2nd PH port? I understand the expansion box will allow this, but I was just curios.

Thanks!

 

[clp]

No, the second pH probe on the AC3Pro will not be available.

Curt