36"X36X36" with wavebox and 2pcs of T6100

[pacificblackguy]

My Reef tank is 36"X36"X36", and i 've a Wavebox 6212 and 2 pcs of T6100 , both r controlled by T7095, how can i set it to 've chance flow, i'm mostly keep the SPS!Thanks!

 

[pacificblackguy]

tank

 

[rvitko]

I don't expect the wavebox will be of much use on a 36" cube. At best I would expect a 1/4" wave. It will have to be centered and used with the wavebox controller to work at all.

The 6100's are fine, I would use Interval 2 mode, 30%-100% pulse every 3 seconds and a 6hr interval.

 

[pacificblackguy]

Thanks for reply! May i know which is the good position should i place the wave box , and how deep should the wave box leave to the water surface? how to set the wave box controller? Thanks!

 

[Jar*Head]

The wavebox need to be against the glass making sure there are no LR structure in front of the pump. As far as setting on the controller is varies. You should start from either rapid pulsing and work your way down or slow pulsing and work your way up. Make sure you adjust the knob a little at the time and wait for 10-30 second. Every tank is different. It is really hard for Roger to tell you where your setting suppose to be at on the controller. You have got to play with it till you get the right frequency. Good luck and enjoy that great piece of equipment.

 

[rvitko]

As REEFER714 said, for the depth, there is a water line painted on the wavebox.