ReefKeepersCorner
Moved On
+2
<a href=showthread.php?s=&postid=11566641#post11566641 target=_blank>Originally posted</a> by aiko670 Does that cute blond know what a
you are?
...
50 Gallon Lookdown Tub-build thread-lots of pics
- Thread starter ReefKeepersCorner
- Start date
...
ReefKeepersCorner
Moved On
Fish_wiz2 - I hit a home plumbing snag so hanging the canopy is getting delayed. I will be taking a bunch more pics when I hang it. More pics coming soon.
<a href=showthread.php?s=&postid=11572111#post11572111 target=_blank>Originally posted</a> by 444reefkeeper
I feel the carpet is a safety hazard and must be removed. Lets say Aiko stops over and takes his shoes off. It is very likely that one of his snaggly toe nails will get caught on one of the loops of the carpet. Thus causing him to fall 2 feet to the floor. Suprisingly, while going into panic convulsions, he lands on his face and actually straightens out his mis-shapen nose. Disgruntled, Aiko sues me for facial disfigurement. He claims the other Shire Folk with make fun of him. I lose the case. Aiko gets plastic surgery and my 540 gallon tank which him and the whole Shire move into. I get left with a 12 gallon nano with a single PC. The sps die from light deprivation causing an ammonia spike killing the tangs and other inhabitants. A fish carcass blocks the drain and causes the tank to overflow, thus running the filter dry. The carcass become unlodged because the filter is has stopped pumping water. A small rush of backed up water goes into the filter. The pump spits it out into the low tank causing splash up that shorts out the light and burns down my house. I am left with absolutely nothing.
So you can see that it is unconditionally crucial that I dispose of the shag carpet promtly.
Sara B.- Karen is referring to the groovy shag carpet upstairs. That and the stained up blue tile have got to go. It does not complete my feng shui.
Mojo baby, yeah!- :lmao: Thanks man! I love threads with pics so I'll keep'em rollin. :smokin:
My evil plan was foiled again..... I'll get you next time.....
ReefKeepersCorner
Moved On
You remind me of Dr. Evils' Mini-Me!
Only hairier!
Only hairier!
craftytony
OT Godfather
how much longer till the swap?
mcliffy2
New member
444, this is kinda OT (well very OT), but since it looks like you know your way around woodworking I figured I'd ask. I'm making my own stand and possibly a bar to go on the front of my inwall tank. The only tools I own are a cordless drill and dremel. Can you give me a list of what I'll need to buy to do my job right? Not necessarily the best equipment, but good enough quality so I can get it done without the equipment being a hinderance. Thanks much.
ReefKeepersCorner
Moved On
tonya- 15 days...
mcliffy2- OT is welcome. I'm not really the best with wood working. You be suprised what you can't see in a picture!
My tools(wood working) are fairly basic. I haven't gotten into actual cabinet making. Yet. I used the following to make the stand and canopy:
10" compound miter saw(can use a circular saw)
For the 2x4 frame and 1x trim pieces. I picked up a 10" sliding compound miter on sale at Menards for $80. Not a brand name, but it does the job. My reg. miter couldn't do wide boards, so I got a sliding miter saw instead.
table saw(can use circular saw)
To cut the ply wood. Once again, a circular saw can be used.
tape measure
Well, you know...
Cordless drill, hammer, pencil, square, wood file, sand paper, a couple drill bits, possibly clamps, rags
Depending on how its made... I screw as much as I can together. I nail my finishing work.
Putty, stain or paint, clear coat
Depends on how you make it. Like I said, I'm no professional so putty and I are good friends. I used to paint my stands, etc.. black. I like the look of stain way better. Its pretty easy too.
Hope this helped atleast a little. These are the basics of what I use. I recently got a router. I'm able to finish the wood without having to buy corner trim, etc.. to give it that finished look. You can find any tool relatively cheap. It depends on what you need it to do though. Example:
Circular saw
My base, table, whatever... angles out so I can 45 wood to make nice corners. I believe its pretty much a base option, but I have seen a CHEAP saw that didn't have that feature. My Skil was $50-60?
Table saw
Usually don't need anything fancy. If you need one at all. Just depends on how often used, how straight of pieces you want and how you plan to trim. Trim can easily hide imperfections... I did buy a nicer Craftsman table saw because I wanted a large table and a blade that miters/angles to a 45 degree angle so I can do a whole lot more. I think I spent around $300. You can probably get one for $100 or under.
compound miter saw
Lots of options here as well. My 1st one was about $50-60. I wanted to be able to chop wider boards so I got a sliding saw. It was really cheap at $80.
router
Lots of options again. My Skil plunge router was $80. My table was $120. If anything I would comprimise more on the router, but not the table. Most of the tables had laminate surfaces which I can see getting all scratched up and not being able to read the marks. I got a Craftsman table which is all cast.
Hows that for OT? :lmao:
mcliffy2- OT is welcome. I'm not really the best with wood working. You be suprised what you can't see in a picture!
My tools(wood working) are fairly basic. I haven't gotten into actual cabinet making. Yet. I used the following to make the stand and canopy:
10" compound miter saw(can use a circular saw)
For the 2x4 frame and 1x trim pieces. I picked up a 10" sliding compound miter on sale at Menards for $80. Not a brand name, but it does the job. My reg. miter couldn't do wide boards, so I got a sliding miter saw instead.
table saw(can use circular saw)
To cut the ply wood. Once again, a circular saw can be used.
tape measure
Well, you know...
Cordless drill, hammer, pencil, square, wood file, sand paper, a couple drill bits, possibly clamps, rags
Depending on how its made... I screw as much as I can together. I nail my finishing work.
Putty, stain or paint, clear coat
Depends on how you make it. Like I said, I'm no professional so putty and I are good friends. I used to paint my stands, etc.. black. I like the look of stain way better. Its pretty easy too.
Hope this helped atleast a little. These are the basics of what I use. I recently got a router. I'm able to finish the wood without having to buy corner trim, etc.. to give it that finished look. You can find any tool relatively cheap. It depends on what you need it to do though. Example:
Circular saw
My base, table, whatever... angles out so I can 45 wood to make nice corners. I believe its pretty much a base option, but I have seen a CHEAP saw that didn't have that feature. My Skil was $50-60?
Table saw
Usually don't need anything fancy. If you need one at all. Just depends on how often used, how straight of pieces you want and how you plan to trim. Trim can easily hide imperfections... I did buy a nicer Craftsman table saw because I wanted a large table and a blade that miters/angles to a 45 degree angle so I can do a whole lot more. I think I spent around $300. You can probably get one for $100 or under.
compound miter saw
Lots of options here as well. My 1st one was about $50-60. I wanted to be able to chop wider boards so I got a sliding saw. It was really cheap at $80.
router
Lots of options again. My Skil plunge router was $80. My table was $120. If anything I would comprimise more on the router, but not the table. Most of the tables had laminate surfaces which I can see getting all scratched up and not being able to read the marks. I got a Craftsman table which is all cast.
Hows that for OT? :lmao:
ReefKeepersCorner
Moved On
Table saws are meant for long cuts(plywood). Since your cutting 3.5", it makes more sense to use a chop saw(miter saw) or a circular saw. Its just a little easier.
ReefKeepersCorner
Moved On
Should be fine, depending on the size of the surge. The display would become the reserve to fill the surge and for evaporation. So frequent top-offs may be needed. Other than that, surge it up!
That is what I am trying to figure out, how to rig an ATO on there. I don't know how I ever lived without one on my tank before.
Let me get this right, yours drains to the sump, gets pumped to the fuge, overflows to fill the surge chamber and then surges right? I might end up just running a small sump for ATO purposes only.
Let me get this right, yours drains to the sump, gets pumped to the fuge, overflows to fill the surge chamber and then surges right? I might end up just running a small sump for ATO purposes only.
ReefKeepersCorner
Moved On
Yep. That is exactly how this one works.
Just make sure you have enough sump to:
Fill the surge tank,
Fill the plumbing between,
Have enough to keep on filling while the water is surging into display, then draining back into sump,
have enough to keep the pump submersed.
With the 50 gal. tub and roughly a 15 gal. surge, I would recommend no less than a 25 gal. sump. There is a 40B on this one and could probably go 3-4 days before needing top-off(for referrence).
Just make sure you have enough sump to:
Fill the surge tank,
Fill the plumbing between,
Have enough to keep on filling while the water is surging into display, then draining back into sump,
have enough to keep the pump submersed.
With the 50 gal. tub and roughly a 15 gal. surge, I would recommend no less than a 25 gal. sump. There is a 40B on this one and could probably go 3-4 days before needing top-off(for referrence).
ReefKeepersCorner
Moved On
ReefKeepersCorner
Moved On
Just got that.
I'm a little slow... :smokin:
ReefKeepersCorner
Moved On
***UPDATE***
****PICS****
***ENJOY***
****PICS****
***ENJOY***
ReefKeepersCorner
Moved On
I love this little horse shoe crab!
Him circling the overflow:
Him circling the overflow:
