6100 help!!

kourt11234

New member
HEy Roger!
I have two 6100 streamers! A few nights ago one started beeping. I pulled it down cleaned as instructed after vinegar bath! After re- installing , the beep continued and the pump didn't turn over, I switched transformers and driver to see if it's the pump or something else. When I switched the other pump it seem to work find, except for the beep. On the other hand, the other pump(the one that was beeping first) didn't work on the other transformer / driver and no beeping. I'm at a lost.
 
This pump should be replaced as repair is no longer possible, the motor and driver of this pump have not been produced in a couple years and we instead have an upgrade kit to model 6105, it is kit 6100.015 (part number of old motor). Based on your description, the motor is the problem.
 
They are about $240 US, they are listed on Tunze.com. If you are in the US and send in your 6100 and the driver is good we would give a $40 credit for the driver. However, you may want to keep the driver as a spare for your other pump.
 
Back
Top