6100 vs 6101

[AlienSpawn]

what is the difference between the 6100 turbella stream and the 6101?

 

[rvitko]

6101 has a new electronic system. The driver is now built into the pump. The alarm is gone, instead the pump shuts down until manually reset by disconnecting power and reapplying power. The transformer is now a laptop type powersupply. The power supply is switchable and as a result the 6101 can be run as a 6000 or 6100 equivalent and replaces both pumps.

 

[AlienSpawn]

Thanks. Can you use the 6101 with the 7095 controller?

 

[spleen93]

Yes

Spleen

 

[AlienSpawn]

Sorry to keep bugging you but I assume the 6201 turbelle will also run off of the 7095 controller? And what is the difference between the 6201 and the 6101?

 

[Aquadepot]

They are two different models.
The 6101's flow rate can be set between 2,500 to 12,000Lt, and runs on a max of 36w. The 6201 on the other hand can run 5,000 to 20,000 and runs on a max of 55w.
They are both controllable by either the 7091 or the 7095.

Cheers
Ryan

 

[stros]

Can you also use the 6101 pumps with an old 7094 multi controller?

Mark

 

[def]

<a href=showthread.php?s=&postid=10514560#post10514560 target=_blank>Originally posted</a> by rvitko
6101 has a new electronic system. The driver is now built into the pump.

Hello,
How reliable is that built-in driver? What should be replaced in case of driver failure, driver only or whole pump?
Thanks.

 

[rvitko]

So far it has been very reliable, I have not had a single pump come back. It is still a new pump though. The entire pump has to be replaced if it fails. It does have a 2 year warranty.

And yes, it will work with the 7094.