6101 not working

[AJT]

I bought 2 6101s & the new controller on 9-12-08 to go with the 2 6100's I already had in my 200.

Both 6100's just stopped working. I cleaned them both & 1 is now working. The other does not do anything. I have swapped transformers & nothing. Looks like from your sticky that there is a minimal amount of parts to clean. I cleaned the bearing, which was clean, shaft, o ring & "outer" bushing.

Am I missing anuthing that I can do or do I need to send to you?

Thanks
andy

 

[Jar*Head]

Look like the driver is fried. Just box it up and send it in for Roger or Rodney to fix it for you. The address is on the second page on the sticky

 

[rvitko]

Yes, please send them in. If you get no alarm, it is likely the drivers. I am unfortunately out of drivers for about 1-2 weeks.

 

[AJT]

I'll send it out to you today from Houston.

Which part is the driver?

 

[rvitko]

I may be misunderstanding your problem. It sounds like your older 6100's have broken down, the driver is the aluminum box with the electronics in it. The 6101's have no external driver. If these are what is down I have all the parts needed in stock, for the 6100' I have everything except drivers.