6105 c clamps

[rogerrgr]

I have 2 x 6105's and they are on pulse mode. Every day I have to angle them back level, they keep pointing towards the top of the tank. I have the c clamp going side to side. Is this normal, or is there anything to do to fix this? The one is brand new and the other is a couple months old.. They sure are powerful! Thanks!

 

[rvitko]

I would just squeeze in on the clamp to tighten the grip, they are pretty tough and you can squeeze them until both sides of the c touch. This likely would be caused by weight or tension on the cord pulling them up and I would check that and slacken the cords a bit if tension is found.

 

[rogerrgr]

I would just squeeze in on the clamp to tighten the grip, they are pretty tough and you can squeeze them until both sides of the c touch. This likely would be caused by weight or tension on the cord pulling them up and I would check that and slacken the cords a bit if tension is found.

I was sorta scared to squeeze the clamp, but will try it. I will double check tension on the cord.. Thank you!